Home > Commercial Touchless Bathroom Faucet How to install touchless bathroom faucet

Fontana Wall Mount Commercial Sensor Faucet

Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals.
Fits all standard US plumbing.

Motion Faucet with Soap Dispenser Option

TypeAutomatic Motion Faucet
Model NumberFS1050
FeatureSensor Faucet
Brand NameFontana Showers
Main MaterialStainless Steel

Fontana Wall Mount Touchless Bathroom Faucet Technical

Model No.FS1050
Faucet Body MaterialStainless Steel
HygienicOperates automatically, eliminates cross-contamination.
ActivationInfrared sensor
Sensor RangeSelf-adjusting
Activation time< 1 second
Flow Rate1-4.5ML/S
Sensor life10000 times
Solenoid Valve LifeOver 500000 flushes
Battery life108000 flushes(4 x AA alkaline battery)
Inlet/outlet diameterG-1/2″
Power SupplyDC:6v(4 x AA alkaline battery) AC:220v-240v; 50/60Hz
Installation featureExposed design; involving easy installation and is user friendly.
Ambient temperature 0~55°C
FacilitiesCommercial washrooms,such as airport, hotel, office building, shopping mall ,hospital, school etc.


Fontana Wall Mount Commercial Touchless Bathroom FaucetFontana Wall Mount Commercial Touchless Bathroom Faucet
FontanaShowers®Product Warranty InformationFontanaShowers Product Warranty

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the touchless faucet for any shipping damages for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
sensor

Sensor Faucet Installation


Step 1


faucet Step 2


Step 3


Step 4


Step 5


Step 6

Soap Dispenser Installation

Step 1
1) Insert PVC hose on wall, in order that install faucet body and the signal line.
2) Put the signal line and water inlet hose inside the PVC hose.
3) Screw fixed joint and nut of faucet on tightly, then close the cover.

Step 4
1) Water outlet, hose connect, connect the faucet body with control box by flexible hose, screw the pipe buckle tightly.
2) Water inlet, hose connect, connect 4" water supply hose with water inlet.
Note: Be sure no water leakage after connecting water.
connect the signal line with the control box, then screw tightly.

Step 5
1) Put the control box on the wall, drill four holes, then insert the plastic bulged tube.
2) Fix the control box on wall by screw.
Note:
1) Please close the water supply and power supply before install.
2) Be sure to install the control box correct, don't put upside down.
3) For easy to maintain, should choose a suitable place to install the control box.
Meanwhile, it must less than 19.6inches(50cm) distant from the basin(Please check the above picture).The installation drawing of the control box.


BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions