Installing your new Fontana Shower panel is simple and straightforward. All our shower panels comes complete ready to install with straight forward simple Installation instructions. 1.Make sure you look into the following: Before installation it’s important to clean the water pipes to prevent blockages, also you will need to make sure sure the hot and cold water valves on the wall can be covered by the shower panel. You will need to avoid installing the new shower panel too high or too low best high is ususally determined by your height and or floor level. It is important before installing the 2 brackets on the wall to measure the distance of those brackets to ensure the perfect positioning for the shower panel. On the back of the panel you will need to connect the hot and cold houses to the hot and cold valves (both hoses are marked red and blue for hot and cold)
