Simple Installation Guide
Be sure to use a masonry or ceramic drill bit. Measure and attach 2 brackets onto wall. make sure the hose will reach the shower pipe from your mounting location. Included anchors are for tile surface.. Depending on the material of the shower panel construction, different tools can be used for this purpose.Measure and attach 2 brackets onto wall. make sure the hose will reach the shower pipe from your mounting location. Included anchors are for tile surface.
Attach the shower panel to the shower pipe, and hang the panel onto the 2 brackets already installed,. Make sure the shower panel is locked into place by pulling down the shower, normarly the shower bar on the back of the panel should slide further into the bracket insuring it is safely locked in place
