Home > Installation Instructions for Fontana 16" Nickel Brushed Rainfall Shower Head Ultrathin Square Shower Head

How to install Fontana 16" Nickel Brushed Rainfall Shower Head Ultrathin Square Shower Head | FS-5802


Installation Instructions for Bathroom Shower Head Visit Product Page

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the products for any shipping damages. If you find damages, do not install.
  • Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
shower Fontana 16" Nickel Brushed Rainfall Shower Head Ultrathin Square Shower Head

Shower Head Installation Instructions


• High-Quality rainfall showerhead: The entire body is made of solid 304 stainless steel with a nickel brush finish, easy to clean and will not hold fingerprint marks.
• 16-inch Square Shape, with rubber gasket and ball joint
• Easy to install: Full kit for Installation (rubber, disk and screws), G1/2 standard connection, just twist on, no tools needed.
• Amazing Shower Experience: Super large size 16-inch rain shower head is full enough to cover all your body. Even if in the low water pressure this showerhead can provide the best rainshower Experience.
• Heavy Duty Material: 100% High-quality stainless steel and brass, PVD multi-layer plating process, let the shower head glossy and smooth mirror-like and easy cleaning. The thickened joint is to prevent breakage, and the filter gasket ensures secondary filtration to keep your health.
• No Tool Installation: Remove the original one and install the showerhead with hands, no tool is required. The whole process spends a few minutes.
• No clogging and dripping: Flexible silicone nozzles stop limescale from sticking which prevents the holes from getting blocked and dripping.
• Rotating Connector: The swivel ball design in the connector allows to adjust the angle of the showerhead in 360°, let you have a variety of shower experiences.
NOTE: Because the water pressure in each family is different, the water pressure or size of the water column of the shower/faucet is different also. This is normal and reasonable.

Specification
• Material: Stainless steel and brass Body
• Function: bath shower head
• Shape: Square
• Size: 16 inches
• Connection: stand 1/2''
• Color: Brushed Nickel



Rainfall Shower Style
Using this large luxurious shower head, like standing under a rain waterfall, offering whole coverage to your entire body, give you a relaxing and comfortable shower experience.
Big Widths to Fit You and Your Shower Enclosure
Over 100 jets over a large, wide area deliver a drenching, luxurious rainshower
Oxygenated water flow
Natural waterfall shower experience is provided to you through oxygenated water flow, which mixed air to increase the oxygen.

2 mm ultra-thin edge
• 2 mm ultra-thin edge, made by seamless fiber laser welding technology.
• unibody design ensures zero water leakage
Flexible silicone nozzles
• All spray nozzles are made of silicon rubber, which is environmental friendly and has high-temperature tolerance and also can be used for a long time. Silicon rubber can be self-cleaned by slightly touching the nozzle and it’s clean!

Easy Installation & Univeral Fitment
• Easy wall-mount installation without tools, G1/2 standard connection, just twist on, as easy as changing a light bulb!
• Adjustable brass ball joint allows you to adjust the showerhead until you find you most comfortable angle




Wall Mount Shower Head Installation Instructions



Step 1: shower Step 2:

Step 3: Step 4:
Step 5: Step 6:
Step 7: Step 8:


1. Apply plumber's tape to the threads on both ends of the shower arm and slide on the decorative escutcheon.

2. Insert the new arm into the fitting in the wall and twist to tighten. Finish tightening with your adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening with an adjustable wrench.

3. Thread the new showerhead onto the arm and hand-tighten. Hold the shower arm in place with groove joint pliers and finish tightening the shower head with your adjustable wrench. Wrap both in a dry cloth to protect the finish.

4. Before securing the decorative escutcheon, turn on the water supply to make sure that all connections are tight and there is no leaking. If no leaks are detected, continue with the installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary.

5. Apply a bead if silicone sealant to the back of the escutcheon and press firmly into place against the installation surface. Wipe away any excess sealant with your damp cloth.

FontanaShowers Installation Instructions