Home > Installation Instructions for Fontana Mendoza Intelligent Chrome Shower Set With Digital Display

How to install Fontana Mendoza Intelligent Chrome Shower Set With Digital Display | FS121EMC

Installation Instructions for Digital Bathroom Shower Set

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
shower Fontana Mendoza Intelligent Chrome Shower Set With Digital Display

Wall Mount Shower Head Installation Instructions

Shower Head: 8", 10", 12" & 16" (Various sizes available)

Step 1: Round Shower Step 2:
Wall Mount Round Showerhead
Step 3: Step 4:
Step 5: Step 6:

1. Remove the old shower head by using the channel lock pliers or monkey wrench. Be sure to turn the pliers counter-clockwise to loosen the old shower head. (Tip: Right is tight, left is loose.)
2. Remove the shower arm by turning it by hand counter-clockwise.Make sure you remember to apply putty or tape to the new arm. (Tip: Using teflon tape is less messy)
3. Apply teflon tape to the threading of the shower arm by wrapping it around the threads, go all the way around 3 or 4 times depending on the quality of the Teflon tape.
4. Install the new shower arm by going clockwise by hand until it is tight, then put painters tape around the arm and tighten the arm with the channel lock or monkey wrench.
5. Place Teflon tape around the threads on the shower head and then place the shower head onto the shower arm by turning the shower head clockwise after the shower arm is already in the wall.

shower set

Hand Held Shower Installation Instructions

Step 1: hand shower Step 2:


Step 3: Step 4:

Step 5:

Hand Shower Elbow Installation

• Complete the outlet pipework ensuring it ends in an appropriate 15mm x 1/2" BSP female thread elbow.
Note: This fitting is not supplied as variations in installations require the selection of a suitable solder or compression fitting.

• Install the 'Wall Outlet', thread long male 1/2" BSP into the appropriate female fitting using PTFE tape to give a watertight joint.
Note: The thread can be cut to size if required. Make sure that all debris is removed from the connector and the section that has been cut is dressed correctly, before installation.

1. Attach the escutcheon to the supply elbow.
2. Apply Teflon tape to the threaded tailpipe of supply elbow.
3. Screw the supply elbow into the female fitting of water supply.
4. Press the escutcheon against the finished wall.

Hand Shower Wall Bracket Installation

Decide the position for the shower head holder on the wall within the bath showering area and proceed as follows:
• Hold the hand shower head holder fixing plate in a suitable position on the wall, mark out the position of the holder. Mark the two locating holes.
• Drill and plug the wall. Use an appropriate masonry drill, but if the wall is plasterboard or a soft building block, use special wall plugs and an appropriate drill bit.
• Slide the inserts onto the screws in the orientation. Secure the inserts by tightening the screws.
• Slide the hand shower head holder body onto the inserts and secure by tightening the grub screw facing down.

Shower Mixer Installation Instructions

Step 1: Step 2:

Step 3: Step 4:

GPM: 0.05 - 0.75 MPa (max)

- It is a thermostatic shower column with LCD, Built-in box structure, convenient installation and maintenance, you can set a pleasant temperature before you shower, also see the temperature and shower time on the screen.
- Brass and stainless steel body material, brass faucet, the high quality, more durable, ceramic valve, anti-corrosion, 500000 times test to avoid water leakage.
- Shower head: silica gel granule to effectively filter water, outlet water evenly; The technique of air injection brings a large amount of air, increase the pressure 30%, water outlet is rich in oxyanion, the outlet water is light and sufficient, saved more 30% water than the pommel classic shower, more pleasant, you can change the angle of the water outlet after installing the shower head.

It has these following characteristics:
* Installation type: recessed in the wall
* Main material: PANT carbon steel + brass
* Ceramic valve
* Connection type: G1 / 2 connection
* Shower head holder type: stable holder
* Water pressure: 0.05-0.07MPa

Fontana Mendoza Intelligent Chrome Shower Set With Digital Display

When it comes to new bathroom upgrades, FontanaShowers is offering shape, finishes and styles that you've looking for. Give your bathroom an elegant glance with our Fontana Mendoza Intelligent Chrome Shower Set with Digital Display. This is one of the most trendiest finishes across decor styles in the bathroom. This has an elegant design and elevates the appeal of your decor made from the highest quality and for great tastes. It comes super seal technology inside, capable of delivering superior performance with a solid construction for long durability that will upgrade your bathroom with a modern and cool look for a long period of time.


  • Brand Name: FontanaShowers
  • Model Number: FS121EMC
  • Type: Bath & Shower Set
  • Cold/Hot Water Control Type: Auto-Thermostat Control
  • Style: Classic
  • Number of Handle: Single Handle
  • Surface: Polished
  • Type: Fixed Support Type
  • Valve Core Material: Brass
  • Surface Finish: Chrome
  • Installations: Wall Mount
  • Fontana Mendoza Intelligent Chrome Shower Set With Digital Display

    Shower & Faucets Installation Instructions