Fontana Océane Wall Mount Multi-Functional Shower System
This hi-tech, stylish and multi-functional shower system offers great performance and maximum comfort. Wall mount showerhead features waterfall, rainfall or a combination of both. The handheld shower conveniently provides extra all over coverage. The six massage jets offer stress relief after a hard day, while the LED light will help achieve the perfect relaxation moment. Modern chrome finish on materials made of steel and brass to ensure durability.
Fontana Océane Wall Mount Multi-Functional Shower System Features:
Brand Name: FontanaShowers
Model Number: FS845RBP
Type: Shower Set
Cold/Hot Water Control Type: Dual Holder Dual Control
Style: Contemporary
Number of Handles: Five Handles
Surface Treatment: Polished
Type: Fixed Support Type
Valve Core Material: Ceramic
Surface Finish: Stainless Steel
Installation Type: Wall Mount
Surface Finish: Chrome
Size: (27.56"x14.96") 700x380 MM
Valve: Hot And Cold Valve
Material: 304 SUS ,Brass
LED Light: Single Color
Function: Rainfall, Waterfall, Misty, Water Column
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
Installation Instructions
Shower Head Installation
Step 1:
Step 2:
shower
Open the top cover and drill according to the marked position. 1. Mark by the position of the four holes. 2. Take care to avoid wires and pipes to prevent damage. 3. Be sure to confirm that the four holes are on the same horizontal line.
Remove the protective cover (F). Mark the positions and drill holes to suit the anchors (A). Install the anchors (A) and fix the rough-in valve (B) into the wall with screws. Use a level to ensure that the rough-in valve (B) is straight and level. (Important: Flush the water supply to remove any dirt and debris before installing the valve body).
Shower Head Installation Instructions
Step 3:
Step 4:
Wrap Teflon tape around the pipe threads and connect water supply lines and in-wall pipes (not included) as desired to the rough-in valve (B). Turn on the water supply and open the cartridge to check for leakage. Then put on the protective cover and finish the wall surrounding the valve. (Note: Test the water pressure after the pipe connections have been made and before the finished wall material is installed).
Two inlet fittings are connected to the pipe joint of the wall; then the nut, expansion screw, and inlet pipe are connected.
Shower Head Installation Instructions
Step 5:
Step 6:
Reinstall the top cover.
Fix the escutcheon (D) to the showerhead (E) with screws (C).
Shower Head Installation Instructions
Step 7:
Remove the protective cover when the finished wall is completed. Then, install the showerhead (E) and press it against the finished wall.
Shower Head Installation Instructions
Shower Head Installation Instructions
How to install Hand-Held Shower
Step 1:
Step 2:
Step 3 & 4:
Hand
Held
Shower
Hand Held Shower
Handheld Shower
Handheld Shower
Handheld Shower
Step 5:
Step 6 & 7:
Step 8:
1. Gather All Parts
2. Hole Locations For Wall Mount
Remove Front Cover (A) from Wall Mount (B). Use Wall Mount Screw Holes (C) to place the desired location. Using a punch or awl, tap the screw hole locations. Holes must be vertically aligned.
3. Anchor Installation
Drill two 1/4” dia. Holes (A). If installing into a studs drill two 1/8” dia. holes and do not use Anchors (B). Insert Anchors (B) into Holes (A) and tap flush with the wall.