Home > Touchless Bathroom Faucet Installation Instructions for Fontana Dual Automatic Soap Dispenser & Sensor Faucet

How to install Fontana Dual Automatic Soap Dispenser & Sensor Faucet


Installation Instructions for Fontana Dual Automatic Soap Dispenser & Sensor Faucet

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the touchless faucet for any shipping damages for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
sensor Fontana Dual Commercial Sensor Faucet And Automatic Soap Dispenser

Sensor Faucet Installations Instructions


Step 1: Step 2:
sensor


Step 3: Step 4:


Step 5: Step 6:


Step 7: Step 8: Hot & Cold Regulator




1. Screw the hose into the corresponding screw-hole of the faucet body. Fix the o-ring into the bottom groove of the faucet body.

2. Insert hose, threaded pipe and data cable through the drilled hole of the countertop. Put rubber washer and metal washer onto the threaded pipe, screwing in mounting nut. Adjust the faucet body correctly and tighten the mounting nut with screws.

3. Install the control box to the wall and fix it with screws.

4. Add the rubber washer and screw supply elbow to the control box.

5. Add rubber washers and connect water lines to the hot and cold inlets of the supply elbow. Then connect the hose to the water outlet and insert data cable into the control box and plugin.

6. Make Connections to water supplies. Turn on hot and cold water supplies and flush water lines into a container for one minute. Important: This flushes away any debris that could cause damage to internal parts.

7. Connect waterlines to angle stops. Turn on the angle stops and check for leaks (DO NOT TURN FAUCET ON).

8. Turn the faucet on for 1 minute to flush any debris.

Automatic Soap Dispenser Installation Instructions



Step 1: Step 2:
instruction
Step 3: Step 4:
Step 5:

1. Fill the soap bottle with liquid soap for the first use.
2. Press and hold the button until liquid soap is dispensed from the nozzle.
3. Place hand below the nozzle to dispense liquid soap into the palm of hand.

The soap dispensers have 4 settings to adjust dispense of soap, the first gear being the least volume and the fourth being maximum. Factory default is set at second gear.

CARE AND MAINTENANCE
If the soap dispenser fails to function correctly, firstly check all connections are tight and free from air leaks. If dispenser still fails to function, place manifold into a bottle of warm water. Pump the warm water through the dispenser to dislodge any dried soap residue and then refit manifold into soap bottle.

Water marks and soap residue on polished chrome surfaces are best cleaned using warm water and a mild detergent. Use a stainless steel cleaner for brushed stainless steel soap dispensers. Never use an abrasive cloth to remove stubborn stains. Dry with a soft clean cloth.
ALWAYS mount the soap tank feeding the dispenser/s BELOW the level of the dispensers

NEVER mount the soap tank feeding the dispenser/s ABOVE the level of the dispensers

Also please note:
The soap type and brand used in these dispensers should not be altered throughout the life of the dispenser as mixing soaps can affect their chemical characteristics and cause them to become more aggressive. If another soap type or brand is needing to be used then the previous type must be thoroughly flushed through and cleaned from the soap dispensers and system prior to its use.


Fontana Reno Inverted U-Shaped Chrome Finish Freestanding Dual Automatic Commercial Sensor Faucet And Soap Dispenser


The Fontana Dual Automatic Soap Dispenser & Sensor Faucet is Flawless easy to use technology definitely make cleaning hands more Hygienic. This cast brass electronic motion faucet is now available in dual function water and soap dispenser sensor faucet. This touch less motion sensor faucet reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles.Uses 4 AA Alkaline Batteries (purchase separately).Water Pressure: 0.5 - 7.0 KGS /cm, 10-125 psi. With its micro-computer controlling its action, the motion sensor faucet can self adjust its best detection zone as per the color and shape of lavatory.Sensor faucet with built-in Infrared AI smart-chip no water dripping design 100% touch-free operation.Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all standard US plumbing.

Features:

  • Brand Name: FontanaShowers
  • Model Number: FST9875
  • Complete motion detection touch less operation
  • Sensitive Sensor with Infrared AI Smart-Chip Automatic Soap Dispenser
  • Factory set to 30-second Auto Shutoff (can be adjusted).
  • Water Pressure: 0.5 - 7.0 KGS /cm , 10 - 125 psi
  • Solid Brass Construction, Chrome Finish
  • Easy to Install - Instructions Included
  • Water resistant solenoid enclosure
  • Advanced energy saving design for long lasting battery life
  • Sensor faucet comes complete with Hoses & Accessories
  • Power Supply: AC 110 V and DC 6 V (batteries not included)
  • AC/DC power option.applications.
  • ADA Compliant.
  • Easily can be installed in new or retrofit applications.
  • Usage: Commercial / Residential
  • Fontana Dual Commercial Sensor Faucet And Automatic Soap Dispenser
    Shower Installation Instructions