Fontana Mugla Round Thermostatic Ceiling Rainfall Shower System
This beautiful chrome rainfall showerhead system comes with everything you can think of. The relaxation of an overhead rainfall, 6 adjustable body jets for maximum relaxation and a handheld shower to ensure all-over coverage. This sleek and versatile shower system provides shower head size options as well as optional LED lighting. Six adjustable body massage jets and a handheld shower wand provided added temptation to this inviting shower system. Built-in hydro-powered device powers the LED lights, which provides you with a visual shower temperature. Built-in hydro-powered device powers the LED lights, which provide visual shower temperature cues to reduce water waste. The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and lighting. When the water temperature is ≤89 °F (≤32 °C), the Blue color will show automatically; When the water temperature is between 97 to 107 °F (36-42 °C), the Green color will show automatically; When the water temperature is between 109 to 122 °F (43-50 °C), Red color will show automatically; When the water temperature is above 122 °F (>50 °C), Red color will flash; When water temperature is above 122 °F (>50 °C), Red color will flash immediately. In addition, the control features also allow you to switch between showerhead and faucet. If you are looking for a showerhead with several excellent features rolled into one, then this FontanaShowers is the best option worth considering.
Fontana Mugla Round Thermostatic Ceiling Rainfall Shower System Features:
Brand Name: FontanaShowers
Model Number: FS-3876T
Type: Bath Shower Set
Cold/Hot Water Control Type: Dual Holder Dual Control
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
Shower Head Installation Instructions
1. Attach the escutcheon to the shower arm. 2. Apply Teflon tape to the threaded tail pipe of the shower arm. 3. Screw the shower arm tightly into the female fitting in the ceiling. 4. Press the escutcheon against the finished ceiling.
Step 1: Take Out the Old Shower Head
You can easily remove it by hand, but depending on how long the rain showerhead has been installed, you might need to use an adjustable wrench.
Hence, if you find it difficult to remove, rotate the showerhead with an adjustable wrench in a counterclockwise direction to unscrew it.
Step 2: Keep the Shower Arm Clean and In Good Shape
After you have removed the head, check the shower arm threads for any debris and old Teflon tape.
If you find any, remove it and clean them off thoroughly. It’s best to use a microfiber cloth when cleaning the thread because it removes Teflon tape perfectly and works great to pick up tiny grits.
Once you’re done cleaning, check if it is corroded or leaking. For damaged threads, it will be best you replace it entirely so you can have a comfortable shower experience any time.
Step 3: Time to Add New Teflon Tape
Since you have removed the old Teflon tape, you have to replace it with new ones. The reason is that this tape helps to protect the shower from leaking after installing the showerhead.
Now apply the new Teflon tape about 3-5 turns on the thread and tear the end part. Use your hands to smooth it out to keep it leveled to the thread.
Keep in mind that when applying the tape, you should go in a clockwise motion so that it doesn’t come off when you attach the head in the same direction.
Step 4: Connect the Showerhead
As said earlier in the tools needed, we’re using the rubber sealing washer that comes with the showerhead. This tool helps to make the showerhead stay watertight and secured on to the thread. Ensure you place it properly before installing it.
After that, reconnect the shower head and tighten it down with your hands. You can employ a chair or ladder to make things easier for you.
Step 5: Tighten the Showerhead On To the Thread
You will need to get the adjustable wrench handy to tighten down the shower very well. But make sure you wrap the threads with a terry cloth, so it doesn’t damage the finish when tightening the showerhead.
Once you have done that, now use the adjustable wrench to tighten down the showerhead. However, don’t over-tight or force it so that it’s easier to remove in the future.
Hand-Held Shower Installation Instructions
1. Open the closed cover of the shower holder and take out the screws.
2. Drill two holes size 0.2" (6mm) on the wall according to the hole position of the shower holder.
3. Use a hammer to break 2 plastic wall plug into two holes. Tighten the screws with the plastic wall plug and locking with the shower holder. Then install the closed cover.
4. Connect the shower hose with the water outlet connection part and hand shower. Plug the hand shower in the shower holder.