Fontana Rio Ceiling Mount 4 Functions Thermostatic LED Multifunction Shower Set
It is our goal to provide customer not only excellent products but also leading lifestyle. The revolutionary micro-nozzle technology makes the outlet holes smaller and denser, increasing the water rate of flow and increasing the water pressure. At the same time it's still water saving. All natural bioactive stone provides ecological pure water filtration to get rid impurities. Keep the pH scale of the water balanced. Helps restore healthier, smoother skin, softer, stronger hair. easy to clean chrome effect shower head. This has an elegant design and elevates the appeal of your decor made from the highest quality and for great tastes. It comes super seal technology inside, capable of delivering superior performance with a solid construction for long durability that will upgrade your bathroom with a modern and cool look for a long period of time.
Fontana Rio Ceiling Mount 4 Functions Thermostatic LED Multifunction Shower Set Features:
Brand Name: FontanaShowers
Model Number: FS9644
Surface Treatment: Polished
Feature: LED Light
Feature: Thermostatic Faucets
Cold/Hot Water Control Type: Auto-Thermostat Control
1. Use a hexagon wrench to lose the lock screws then separate the showerhead assembly and bracket.
2. Dig 4 Ø10 holes on the ceiling according to the dimension of the screws.
3. Use a hammer to thwack the 4 screws into 4 holes.
4. Install the bracket on the expansion screws then use copper sleeve wrench to lock 4 screws.
5. Make sure all the water inlet pipe connected well without leaking before insert the power plug into the socket. 6. Fix the shower assembly on the bracket by turn the locking bolt.
Mixer Installation
a.Release Six handwheel levers according to above directions.
b.Take apart the embed valve, panel, and handwheel.
1. Dig the embed space for the pipe on the wall according the specification of the valve.
2. Dig 4 hole according to the position of the screws.
3. Use a hammer to thwack the screws into 4 holes.
4. Fix the valve body with 4 screws.
5. Find out the expansion screw heads with washer and spring washer. Use copper sleeve wrench to lock the screw heads with the embed valve body.
6. After connect all the pipes and before sealing the wall with concrete, confirm no leaking problem occur when turn on water.
7. Fix the decorative panel on the embed valve body.
8. Screw the handwheel arms with the handwheels.
Hand-Held Shower Instructions
Shower Holder Installation
1. Open the closed cover of the shower holder and take out the screws.
2. Drill two holes size 6mm on the wall according to the hole position of the shower holder. Use a hammer to break 2 plastic wall plug into two holes. Tighten the screws with the plastic wall plug and locking with the shower holder. Then install the closed cover.
3. Connect the shower hose with water outlet connection part and hand shower. Plug the hand shower in the shower holder.