Home > Installation Instruction For Fontana Trialo Color Changing LED Shower Head with Adjustable Body Jets

Fontana Gold Trialo Color Changing LED Shower Head with Adjustable Body Jets

The Trialo Rainfall Shower Set from FontanaShowers is one of the most customizable models available. You can adjust almost any feature to best suits your needs. The shower head is available in round or square design and varies in size from 8” to 24”. The standard mixer comes with the set but can be upgraded to a thermostatic mixer. Six adjustable body massage jets and a handheld shower for your convenience. It comes complete with accessories and installation instructions.

Fontana Gold Trialo Color Changing LED Shower Head with Adjustable Body Jets Features:

Brand Name: FontanaShowers

Model Number: LED-SHOWER-HEAD-0522GG

Type: Shower Set

Material: Solid Brass

Finish: Gold

Style: Contemporary Rain Showerhead

Showerhead Thickness: 0.33"

Showerhead Width: Available in 8", 10", 12", or 16"

Showerhead Length: Available in 8", 10", 12", or 16"

LED Power Source: Water Flow

LED Colors: Blue, Green, Red

Showerhead Style: Contemporary Rain Shower

Mount Method: Wall or Ceiling Mount

Connection: 1/2" US standard (included)

Shower Arm: Included

Body Jets: Solid Brass

Fontana Gold Trialo Color Changing LED Shower Head with Adjustable Body Jets

FontanaShowers® Product Warranty Information

Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.

-------

-----

SHOWER HEAD INSTALLATION INSTRUCTIONS


Step 1:	shower	Step 2:



Step 3:		Step 4:



Step 5:

Use your hands counter clockwise to unscrew the old showerhead and removed it. Take out the showerhead, make sure the shower filter is placed in the connector. Ensure the showerhead full horizontal alignment wall mounted shower arm thread. Use your hands clockwise to tighten showerhead.

HAND-HELD SHOWER INSTALLATION INSTRUCTIONS

STEP 1: HAND
HELD
SHOWER STEP 2:

HAND
HELD
SHOWER

STEP 3:

SHOWER BODY JETS INSTALLATION INSTRUCTIONS

Step 1:	Body Sprays	Step 2:

Set the decorative cover on the body jet.		Roll the raw material belt in the thread screws.

Step 3:

Use a wrench to tighten 6 body jets on the water outlet holes. Tighten it in a clockwise direction.

THERMOSTATIC MIXER INSTALLATION INSTRUCTIONS

Parts: 1. Rough-In Body x1 2. Anchor x4 3. Positioning Bar x2 4. Tapping Screw 1 x4 5. Tapping Screw 2 x4 6. Plate x1 7. Cover x3 8. Button x3 9. Screw 1 x3 10.Diverter Handle x1 11. Temperature Handle x1 12. Volume Handle x1	Shower Mixer

Step 1:		Step 2:
	Shower Mixer


Step 3:		Step 4:

Attach the positioning bar to the rough-in body (4,5) with tapping screws. Mark the location of the mounting holes.		Remove the rough-in body and drill pilot holes at the locations marked in the previous step. Insert anchors.

Step 5:		Step 6:

Attach the rough-in body to the wall.		Connect the rough-in body to the water supply pipes according to the diagram.

Step 7:		Step 8:

Finish the wall surrounding the shower with a thickness of 1/2"-1-1/2". a) Finished wall surface should not exceed the upper edge of the installation box.		If the tile exceeds the edges of the installation box, trim the tile as necessary to install the trim plate. b) Trim the tile around the installation box as necessary.

Step 9:

Remove the plastic guard and place the trim plate over the installation box. Install the screws covers, handles and buttons.
Shower Valve Mixer Installation