HOW TO INSTALL FONTANA COLOR CHANGING LED RAIN SHOWER HEAD (SOLID BRASS) WITH BUILT IN MIXER | FS792M
Easy Installation Steps For Shower Set
Visit Product Page
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the products for any shipping damages. If you find damages, do not install.
Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
shower
Shower Head Installation Instructions
Ceiling Mount Installation Instructions
shower
Step 1:
Step 2:
According to the template (B) mark the location of the mounting holes (1). Use a drill with a 6mm bit to drill mounting holes into studs or blocking.
Install the mounting brackets (C) with the tapping screws (D1). Thread the shower bars (E) onto the mounting brackets, and the inlet hose (F) onto the water inlet.
Step 3:
Step 4:
Attach the shower head (A) to the shower bars (E). Connect the inlet hose (F) to the showerhead.
2 inlets are provided in big shower heads so the water disperses equally throughout the showerhead.
Step 5:
Additional Information: - The LED lights are powered by water flow and will be activated once the water is turned on. - The LED light will change its color by detecting water temperature: - 0-30 °C (32-86 °F): Blue LED - 30-40 °C (86-104 °F): Green LED - 40-50 °C (104-122 °F): Red LED - 50-100 °C (122-212 °F): Flashing Red LED
 WITH BUILT IN MIXER PRODUCT DISPLAY.jpg)
