Fontana Lima Superior Quality Chrome Finish Thermostatic Round Rainfall Showerhead
This Lima Superior quality bathroom brass thermostatic concealed rain shower head round shower provides a luxurious showering experience and is the perfect complement to any modern bathroom. The modern design handheld shower, and an easy-to-use mixer valve, both made from high-quality solid brass. Dual handle bathroom shower head in chrome finish is the perfect complement to today's modern home. Chrome finish has rapidly become one of the trendiest finishes across décor styles in the bathroom. Be sure, when it comes to a new bathroom shower, FontanaShowers is offering shape, finish, and styles you're looking for.
Fontana Lima Superior Quality Chrome Finish Thermostatic Round Rainfall Showerhead Finish Feature:
Use your hands counterclockwise to unscrew the old showerhead and removed it.
Take out the showerhead, make sure the shower filter is placed in the connector.
Ensure the showerhead full horizontal alignment wall mounted shower arm thread.
Use your hands clockwise to tighten showerhead.
1. Install the valve body. Wrap the threaded portion of the joints in Teflon tape and connect the water inlet and outlet.
2. Put the protective cover on the valve body and finish the shower wall.
3. When the finished wall is complete, remove the protective cover.
4. Install the escutcheon, and handle. Tighten the set screw with an Allen wrench to secure.
5. Attach the shower arm escutcheon to the shower arm. Wrap the threaded portions of the shower arm with Teflon tape and connect the arm to the shower inlet. Adjust the direction of the water flow as needed. Attach the rainfall shower head to the shower arm.
allation
Hand-Held Shower Instructions
5. Hole Locations For Wall Mount
Remove Front Cover (5A) from Wall Mount (5B). Use Wall Mount Screw Holes (5C) to place the desired location. Using a punch or awl, tap the screw hole locations. Holes must be vertically aligned.
7. Wall Mount Installation
Place Wall Mount (7A) into wall and inset Mounting Screws (7B) through Wall Mount Holes (7C) and tighten until Wall Mount (7A) is flush with the wall. Do Not Over Tighten! Insert Front Cover (7D) into Wall Mount (7A).
8. Drop Elbow & Hose Installation
Apply PTFE plumbers tape on both ends of Pipe Nipple (8A) (not included). Screw Pipe Nipple (8A) into the elbow inside the wall. The Pipe Nipple (8A) is to project 1/4” – 3/4” from the finished wall. Screw Drop Elbow (8B) onto Pipe Nipple (8A) and tighten until Drop Elbow (8B) is property positioned and flush to the finished wall.
Place Rubber Seal (8C) inside Hex Hose Fitting (8D). Connect Hex Hose Fitting (8D) into Drop Elbow Outlet (8E) by turning Hex Hose Fitting (8D).
9. Unit Start Up Turn on hot and cold water supplies, and check al connections for leaks.
10. Final Flushing
For final flushing, turn valve on and allow water to run through the Hose (10A) for several minutes. Allow water to run for several minutes until all foreign matter clears the line.
11. Shower Arm Installation
Place Rubber Seal (11A) inside Tapered Hose Fitting (11B). Conned Hand Shower (11C) to Hose (11D) by turning Tapered Hose Fitting (118) clockwise.
Waring: Make sure Hand Shower (11C) is securely tightened to Hose (11D).
The installations & illustrations for Fontana Lima Superior Quality Chrome Finish are for informational purposes only.
