Installation Instructions For Fontana LED Bathtub Faucet
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided
Bathtub Faucet Installation Steps
Step 2: The valve body excavates hole size. (L 14.37"xH 2.16"xD 2.16-2.24")
Step 3: Turn off the main switch, adjust the cold and hot water inlet interface and the upper and lower water outlet interface, and use screws to fix the valve body in the wall. The installation in the wall is completed and the switch is opened for the sealing test.
Step 4: Install the spout part: Use the connecting pipe to connect the left outlet of the valve body to the interface of the spout.
Step 6: Installation Panel: The valve body is fixed, and the panel is covered on the valve body.
Step 7: Install handle: Put two handles on top and lock with a hexagonal wrench.