The milan single lever wall mount chrome finish faucet is a great way to save water. This faucet is a great way to keep the water from running all over the place and making a mess.
Fontana Milan Single Lever Wall Mount Chrome 8.27" (210MM) Sink Faucet
Give your bathroom an elegant glance with sink faucets and fixtures. Single Lever Bathroom Faucet in Chrome finish is the perfect complement to today's modern home. Chrome finish has rapidly become one of the trendiest finishes across decor styles in the bathroom. Capturing the style of minimalist design, purist faucets deliver streamlined water control. This sink faucet trim features a 90-degree angled spout for easy operation. The convenient wall-mount design provides a clutter-free countertop in your bath or powder room. Be sure, when it comes to new bathroom sink faucets, FontanaShowers is offering shape, finish and styles you're looking for.
Fontana Milan Single Lever Wall Mount Chrome 8.27" (210MM) Sink Faucet Features:
Before you begin, please read the installation instructions below, Observe all local building and safety.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
sensor
Faucet Installations
Step 1:
faucet
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Step 9:
Step 10:
Step 11:
Step 12:
1. Position and fix the valve body (B) into the wall with screws (C). Make sure that the valve body (B) is completely level. 2. Connect hot and cold water inlets of the valve body (B) to the main water supply. (Solid copper pipes are recommended for the connection.) 3. Apply Teflon tape (F) to the threaded tail pipe of the spout body (G). Then press escutcheon (D) firmly against the finished wall and screw the spout body (G) through escutcheon (D) into the valve body (B) tightly. 4. Place the cover plate (H) to the valve body (B) and press it against the finished wall. Install the handle (I) and fix the set screw (1) with Allen key (K), then put on the indication button (L).