Fontana Royal Oil Rubbed Bronze Digital Rainfall LED Shower System
The warm and inviting look of our Fontana Royal Rainfall LED Shower System will have you hooked before you even turn it on. Six adjustable body massage jets, a handheld shower wand and a digital display for more accurate temperature provided added temptation to this inviting shower system Digital display for more accurate temperature. With four rainfall showerhead sizes to choose from, 31" X 16", 31" X 31", 40" X 20" including one of our largest at 40" x 40," you're sure to find the exact fit for your showering experience. The Fontana Royal Shower System is manufactured using superior quality solid brass material. When it comes to new bathroom shower sets, FontanaShowers is offering shape, finish, and styles you're looking for. Built-in hydro-powered device powers the LED lights, which provide visual shower temperature cues to reduce water waste. The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and lighting. When the water temperature is ≤89 °F (≤32 °C), the Blue color will show automatically; When the water temperature is between 97 to 107 °F (36-42 °C), the Green color will show automatically; When the water temperature is between 109 to 122 °F (43-50 °C), Red color will show automatically; When the water temperature is above 122 °F (>50 °C), Red color will flash; When water temperature is above 122 °F (>50 °C), Red color will flash immediately.
Fontana Royal Oil Rubbed Bronze Digital Rainfall LED Shower System Features:
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
shower
Shower Head Installation Instructions
Shower Head Installation Instructions
Shower Parts
Shower Head Installation Instructions
Connect pipe 1 with decorative cover
Step 1:
shower
Step 2:
Draw the holes on the ceiling according to the Decorative Cover and pipes.
Drill the holes on the ceiling according to the hole specification and install 4 pipes.
Shower Head Installation Instructions
Step 3:
Step 4:
Put the screw bolts through the hole on the side to lock pipes.
Install the four-pipes on the showerhead.
Shower Head Installation Instructions
Step 5:
Step 6:
Shower Head Installation Instructions
1. Mark the fixing positions and drill holes to suit the anchors.
2. Install the anchors and fix the mounting bar to the ceiling with screws.
3. Screw the shower bars into the shower head tightly.
4. Attach the shower bar to the mounting bar and fix screws and nuts to lock shower bar with mountthe ing bar at the desired height.
5. Add screen washers. Screw shower hose (not included) to the water inlet on the showerhead and then to the water outlet in the ceiling.
Showerhead Installation Instructions
Handheld Shower Installation Instructions
Step 1:
Step 2:
Hand
Held
Shower
Hand Held Shower
Handheld Shower
Step 3:
Shower Body Spray Installation Instructions
Step 1:
Step 2:
Body sprays
Remove the decorative plate (A) out of the body.
Remove the screws from the outlet face (B) and connector body (C) with the Allen key (D).
Body Spray Installation Instructions
Step 3:
Step 4:
Screw the threaded pipe (E) to the water supply fittings. Push the plastic box (F) into the wall through the threaded pipe (E). Then, install the decorative plate (I) into the plastic box (F). Make sure the position is correct according to the diagram.
Screw the connector (G) into the threaded pipe (E) with the Allen key (H). Install the connector body (C) to the connector (G). When finish installation, please check to make sure the connection is completed. Then, fix the screws into the body (C) with Allen key (D) and make sure the body (C), connector (G) and decorative plate (I) are tightened. Make sure the one side with the bulge is in the top position.
Body Spray Installation Instructions
Step 5:
Step 6:
Install the outlet face (B) to the body (C). Make sure the connection of body (C) and outlet face (B) are completed. Tighten the screw through the outlet face (B) into the body (C) with the Allen key (D).
Install the decorative plate (A) into the outlet face (B) tightly. Make sure the hole and the raised dot are in the correct position when you push the decorative plate (A) into the outlet face (B).
Body Spray Installation Instructions
Thermostatic Mixer Installation Instructions
How to install the Shower Set with Wall Mount Showerhead, Hand Held Shower and Shower Mixer
