Home > Installation Instructions for Fontana Versilia Color Changing LED Shower Head with Adjustable Body Jets and Mixer

Fontana Versilia Color Changing LED Shower Head with Adjustable Body Jets and Mixer

This shower set is Fully Customizable! It boasts features that will ensure a brand new showering experience. The LED light functions are two-fold. First, the changing colors work as a perfect visual water temperature indicator - you never have to walk into a shower that is too cold or too hot ever again! Second, the dimmable LED lights change according to the water pressure and help set the mood for a relaxing bathing experience. The body jets will leave you refreshed and rejuvenated. The entire set is made of brass and stainless steel to increase the product's longevity. Built-in hydro-powered device powers the LED lights, which provide visual shower temperature cues to reduce water waste. The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and lighting. Modern, stylish, and easy to install, the Fontana Versilia LED Rain Shower Head with adjustable Body Jets is the definite choice for your bathroom! Modern stylish design completely brushed stainless steel made to match or stand out from your other bathroom fixtures.

Fontana Versilia Color Changing LED Shower Head with Adjustable Body Jets and Mixer Features:

  • Brand Name: FontanaShowers
  • Model Number: FS-612V
  • Material: Solid Brass
  • Style: Contemporary Rain Showerhead
  • Showerhead Height (thickness): 0.33"
  • Showerhead Size Available: 8", 10", 12", 16", 20", 24"
  • LED Power Source: Water Flow
  • LED Color: Blue, Green, Red
  • Body Jets: 360° adjustable Body Jets
  • Connection: 1/2" US standard (included)
  • Shower Arm: Included
  • Thermostatic Valve Temperature: Up to 122 Degrees Fahrenehit
  • Shower System Feature: Anti-scald device
  • Mount Method: Wall or Ceiling Mount
  • Finish: Chrome
Fontana Versilia Color Changing LED Shower Head with Adjustable Body Jets and Mixer
FontanaShowers® Product Warranty Information FontanaShowers Product Warranty

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
------ -----

Shower Head Installation Instructions


Step 1: shower Step 2:



Step 3: Step 4:

Step 5: Step 6:

1. Attach the escutcheon to the shower arm.
2. Apply Teflon tape to the threaded tail pipe of the shower arm.
3. Screw the shower arm tightly into the female fitting in the ceiling.
4. Press the escutcheon against the finished ceiling.

Step 1: Take Out the Old Shower Head
You can easily remove it by hand, but depending on how long the rain showerhead has been installed, you might need to use an adjustable wrench.
Hence, if you find it difficult to remove, rotate the showerhead with an adjustable wrench in a counterclockwise direction to unscrew it.

Step 2: Keep the Shower Arm Clean and In Good Shape
After you have removed the head, check the shower arm threads for any debris and old Teflon tape.
If you find any, remove it and clean them off thoroughly. It’s best to use a microfiber cloth when cleaning the thread because it removes Teflon tape perfectly and works great to pick up tiny grits.
Once you’re done cleaning, check if it is corroded or leaking. For damaged threads, it will be best you replace it entirely so you can have a comfortable shower experience any time.

Step 3: Time to Add New Teflon Tape
Since you have removed the old Teflon tape, you have to replace it with new ones. The reason is that this tape helps to protect the shower from leaking after installing the showerhead.
Now apply the new Teflon tape about 3-5 turns on the thread and tear the end part. Use your hands to smooth it out to keep it leveled to the thread.
Keep in mind that when applying the tape, you should go in a clockwise motion so that it doesn’t come off when you attach the head in the same direction.

Step 4: Connect the Showerhead
As said earlier in the tools needed, we’re using the rubber sealing washer that comes with the showerhead. This tool helps to make the showerhead stay watertight and secured on to the thread. Ensure you place it properly before installing it.
After that, reconnect the shower head and tighten it down with your hands. You can employ a chair or ladder to make things easier for you.

Step 5: Tighten the Showerhead On To the Thread
You will need to get the adjustable wrench handy to tighten down the shower very well. But make sure you wrap the threads with a terry cloth, so it doesn’t damage the finish when tightening the showerhead.
Once you have done that, now use the adjustable wrench to tighten down the showerhead. However, don’t over-tight or force it so that it’s easier to remove in the future.

Hand Held Shower Installation Instructions


Step 1: Hand Held
Shower
Step 2:

Hand
Held
Shower




Step 3: Step 4:


Step 5: Step 6:


Step 7:



Shower Body Jets Installation Instructions

Step 1: Body Sprays Step 2:




Step 3: Step 4:



Step 5: Step 6:



Step 7:


Shower Thermostatic Mixer Installation Instructions



Mixer Installation Instructions
Parts:

1. Rough-In Body x1
2. Anchor x4
3. Positioning Bar x2
4. Tapping Screw 1 x4
5. Tapping Screw 2 x4
6. Plate x1
7. Cover x3
8. Button x3
9. Screw 1 x3
10.Diverter Handle x1
11. Temperature Handle x1
12. Volume Handle x1
Shower
Mixer
Step 1: Step 2:
Shower
Mixer





Step 3: Step 4:
Attach the positioning bar to the rough-in body (4,5) with tapping screws. Mark the location of the mounting holes.
Remove the rough-in body and drill pilot holes at the locations marked in the previous step. Insert anchors.


Step 5: Step 6:
Attach the rough-in body to the wall.

Connect the rough-in body to the water supply pipes according to the diagram.


Step 7: Step 8:
Finish the wall surrounding the shower with a thickness of 1/2"-1-1/2".
a) Finished wall surface should not exceed the upper edge of the installation box.
If the tile exceeds the edges of the installation box, trim the tile as necessary to install the trim plate.
b) Trim the tile around the installation box as necessary.




Step 9:

Remove the plastic guard and place the trim plate over the installation box. Install the screws covers, handles and buttons.




How to install the Shower Set with Showerhead, Hand Held Shower and Shower Mixer


BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions