How to install Fontana Light Oil Rubbed Bronze Wall Mount Commercial Automatic Sensor Faucet With Insight Infrared Technology | FS1093
Easy step by steps Installation Instructions for Commercial Sensor Soap Dispenser
Visit Product Page
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the products for any shipping damages. If you find damages, do not install.
Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
sensor
Sensor Faucet Installation Instructions
Step 1:
Step 2:
Sensor Faucet
Sensor Faucet Installation Instructions
Step 3:
Step 4:
Sensor Faucet Installation Instructions
Step 5:
Step 6:
Sensor Faucet Installation Instructions
Use care when installing the spout to avoid scratching the finish.
Remove the plaster guard and save the three screws. They will be required to attach the spout shank.
Remove and discard the thread protector.
Thread the spout into the outlet port.
Secure the flange to the wall with the screws (wrench supplied) that were removed from the thread protector.
Confirm that the O-ring is in the notch in the interior of the spout escutcheon.
Apply plumbers putty or other sealant to the back surface of the spout escutcheon according to the putty manufacturer's instructions.
Press the escutcheon firmly against the wall.
Install the Sensor Cover
Turn the setscrew (already installed in the sensor) counter clockwise until it is tight. Do not overtighten.
Position the sensor cover and secure with the setscrew. Do not overtighten.
Fontana Light Oil Rubbed Bronze Wall Mount Commercial Automatic Sensor Faucet With Insight Infrared Technology
Minimize waste of water, by using this automatic wall mount Light Oil Rubbed Bronze faucet . The Sensor Faucet, an electronically controlled faucets that eliminate the need to touch or turn handles. Insight technology calibrates the sensor to filter false triggers and optimize the faucet's operation. Through the use of sensor beams the automatic faucet determines when an object is in front of it and automatically turns on the faucet. Since there is nothing to touch and nothing to reach for, an automatic faucet eliminates all of that cleaning and disinfecting that you do to try to maintain a hygienic surface. Light Oil Rubbed Bronze bathroom sensor faucets are anti-erosion, anti-abrasion and high strength. This is trim set only. It requires valve kit to complete the faucet. Safe Drinking Water Act (SDWA- Low Lead) compliant. On demand on and off. Valve kit is factory set to 30 second max. Continual run cycle if it is turned on continuously.
Features:
Brand Name: FontanaShowers
Model Number: FS1093
Type: Motion Sensor Sink Faucet
Finish: Light Oil Rubbed Bronze
Faucet Applications: Residential & Commercial
Auto Shutoff: 30-second (can be adjusted)
Water Flow Rate: 0.5 gal/min (1.9 l/min)
Aerator: Vandal-resistant aerator.
Spout Reach: 9" (229 mm)
Material: Brass construction
Usage: Commercial / Residential
Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all standard US plumbing.