How to install Pessac Oval Brass Antique Bronze Bathroom Sink | FS2289
Easy step by step Installation Instructions for Pessac Oval Brass Antique Bronze Bathroom Sink
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
sink
Bathroom Sink Installation Instructions
Size:
basin
Drop-in Sink Installations
Step 1:
sink
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Drop-In Installation:
1. Install your counter top onto your vanity cabinet.
2. Lower the sink into the cutout on the counter to
confirm the sink will fit properly. The rim of the sink
should sit flat on the counter top.
3. Remove the sink and run a bead of neutral cure
silicone sealant around the underside of the rim.
4. Carefully lower the sink back into the cutout and
press the sink firmly into place. Wipe away any excess
sealant with a damp cloth.
Position the sink under the opening. Hold the sink in place and rotate each clip over the rim. Evenly tighten the clips to secure.
5. Apply a thin bead of silicone sealant around the
perimeter of the sink, where the sink meets the
counter top. This will prevent moisture from getting
underneath the rim of the sink.
6. Proceed to the installation of your drain and faucet.
Allow 24 hours for the silicone sealant to fully dry.
Undermount Sink Installations
Step 1:
sink
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Undermount Installation
1. Carefully turn the countertop over, resting it on a
soft, stable surface to prevent damage.
Important: The countertop is very fragile. Take
caution when handling, and have someone assist if
needed.
2. Position the sink over its cutout on the counter top.
Make sure the sink is centered with the faucet hole
and is evenly spaced between the bolt holes.
3. Use a pencil to draw an outline around the sink
perimeter.
4. Remove the sink from the counter top. Apply a bead
of silicone sealant around the top edge of the sink rim.
5. Carefully place the sink upside down on the
counter top, positioning it within your marked outline.
Once positioned, press firmly into place.
6. If sink clips were included, at each of the bolt holes
in the counter top, attach the sink clips by placing the long end of the bracket flat against the sink lip. Screw
the wing bolts through the brackets and bolt holes
and tighten.
7. Carefully turn the counter top and sink over. If
needed, reposition the sink by slightly loosening the
wing bolts and adjusting.
8. Wipe away any excess sealant with a damp cloth,
and proceed to installing the counter top. Allow 24
hours for the silicone sealant to fully dry.
Cleaning and Maintenence
To protect the copper finish, it is recommended that
a coating of wax is applied to the sink. Most wax
products have natural and added UV filters that help
guard against color and finish degradation. Wax
should be applied as often as necessary, depending
upon usage.
It is recommended that you use a cleaner or polish
that is designed specifically for copper products. You
may use a gentle soap, such as dishwashing liquid and
warm water. We recommend the use of a soft sponge
or microfiber washcloth. Do not use any abrasive
cleaning pads or materials. Rinse with warm water
and dry with a clean, soft cloth.
Acidic cleaners, such as lemon juice and vinegar, will
strip the antique finish from the copper. Mixtures
containing acidic chemicals should be avoided to
preserve the finish.
Complete the faucet and drain installations.
Run water into the sink and check all connections for leaks.
Drain Connection
Step 1:
sink
Step 2:
Pessac Oval Brass Antique Bronze Bathroom Sink
Pessac bathroom sink is oval in its shape and comes in an antique bronze finish. The sink is made from brass material and holds a capacity of 2.37 gallons.
