Home > Installation Instructions For Fontana Florence Wall Mount Waterfall Rainfall Chrome Finish Shower Head

Fontana Florence Wall Mount Waterfall Rainfall Chrome Finish Shower Head with Handheld Shower and Faucet Spout

With our Florence shower set you get everything you need in one kit. The main shower head comes with a dual function – waterfall and rain shower. The set also includes a hand held shower, a faucet spout and three handles for easy operations. Everything is wall mount, so installation is simple. It comes with chrome finish, so it will easily match other bathroom fixtures. Only the best quality materials have been used – the valve comes with ceramic core material for a long lasting life time. It comes complete with accessories and installation instructions.

Fontana Florence Wall Mount Waterfall Rainfall Chrome Finish Shower Head with Handheld Shower and Faucet Spout Features:

  • Brand Name: FontanaShowers
  • Model Number: FS691CSQ
  • Type: RainFall/WaterFall Shower System
  • Finish : Chrome
  • Cold and Hot Water: Thermostatic Control
  • Number of Handles: Triple Handle
  • Surface Treatment: Polished
  • Type: Fixed Support Type
  • Valve Core Material: Ceramic
  • Installation Type: Wall Mount
  • Size: 5.1x7.8 inch
  • Top Shower Head Size: 21.6"×9.05"(55×23cm)
  • Hand Shower Hose: 59" (150CM);
  • Hand Shower Material: Brass
  • Connection: G1/2
    		•  Fontana Florence Wall Mount Waterfall Rainfall Chrome Finish Shower Head with Handheld Shower and Faucet Spout
    Oruro Chrome Finish Shower Panel Set Oruro Chrome Finish Shower Panel Set Oruro Chrome Finish Shower Panel Set
    FontanaShowers® Product Warranty Information FontanaShowers Product Warranty




    Hand-Held Shower Instructions






    5. Hole Locations For Wall Mount
    Remove Front Cover (5A) from Wall Mount (5B). Use Wall Mount Screw Holes (5C) to place the desired location. Using a punch or awl, tap the screw hole locations. Holes must be vertically aligned.

    7. Wall Mount Installation
    Place Wall Mount (7A) into wall and inset Mounting Screws (7B) through Wall Mount Holes (7C) and tighten until Wall Mount (7A) is flush with the wall. Do Not Over Tighten! Insert Front Cover (7D) into Wall Mount (7A).





    8. Drop Elbow & Hose Installation
    Apply PTFE plumbers tape on both ends of Pipe Nipple (8A) (not included). Screw Pipe Nipple (8A) into the elbow inside the wall. The Pipe Nipple (8A) is to project 1/4” – 3/4” from the finished wall. Screw Drop Elbow (8B) onto Pipe Nipple (8A) and tighten until Drop Elbow (8B) is property positioned and flush to the finished wall.
    Place Rubber Seal (8C) inside Hex Hose Fitting (8D). Connect Hex Hose Fitting (8D) into Drop Elbow Outlet (8E) by turning Hex Hose Fitting (8D).


    9. Unit Start-Up
    Turn on hot and cold water supplies, and check all connections for leaks.


    10. Final Flushing
    For final flushing, turn the valve on and allow water to run through the Hose (10A) for several minutes. Allow water to run for several minutes until all foreign matter clears the line.


    11. Shower Arm Installation
    Place Rubber Seal (11A) inside Tapered Hose Fitting (11B). Connect Hand Shower (11C) to Hose (11D) by turning Tapered Hose Fitting (118) clockwise.

    Warning: Make sure Hand Shower (11C) is securely tightened to Hose (11D).





    The installations & illustrations for Fontana Florence Wall Mount Waterfall Rainfall Chrome Finish Shower Head are for informational purposes only.