 |
 |
 |
|
Fontana PureTouch Warm Brushed Copper 2 in 1 Sensor Faucet and Soap Dispenser
Through this Warm Brushed Copper Edition of the Fontana PureTouch™, the definition of contemporary elegance lies in the unity of design for faucet and soap dispenser. The warm brushed copper finishes confer much richness and glamour on modern commercial washrooms. Deck mounted from solid brass and a metal that offers durability, the fixture guarantees strength and durability. Advanced infrared sensors powered by an AI smart-chip allow for instant touchless operation, thus increasing sanitation levels and decreasing wastage. The water automatically shuts off after 30 seconds, ensuring maximum water efficiency, while its flow rate, adjustable between 0.5-1.0 GPM, caters to various usage needs. It runs on an AC 110V or a DC 6V power source, providing installation flexibility. The waterproof-encased solenoid assures better reliability while also bearing ADA compliance for the comfort of every user. Installation is an easy affair, with hoses and accessories included. A perfect blend of graceful style, contemporary sensing, and sheer practicality, this 2-in-1 innovative solution heightens hygiene standards and fits right into an uptown interior.
Unified Touchless Design
- Brand Name: FontanaShowers®
- Model Number: FS7083CB
- Style: Contemporary
- Type: Touchless Bathroom Faucet & Soap Dispensers
- Installation Type: Deck Mounted
- Finish: Warm Brushed Copper
- Sensor Type: Sensitive
- Infrared: AI Smart-Chip
- Material: Metal, Brass
- Dispenser Type: Automatic Dispenser
- Working Mode: Infrared Sensor
- Auto Shutoff: 30 Seconds (Factory Set, Can be Adjusted).
- Water Pressure: 0.5-7.0 KGS /cm, 10-125 PSI
- Installation Manual: Included
- Solenoid Enclosure: Water-resistant
- Hoses & Accessories: Included
- Power Supply: AC 110 V and DC 6 V (batteries not included)
- Power Option: AC/DC
- Compliance: ADA
- Flow Rate: Available Flow Rate From 0.5 to 1.0 GPM
- Width: 5 1/4 inches (133 mm)
- Height: 3 7/8 inches (98 mm)
- Spout Length: 1 5/8 inches (42 mm)
- Mounting Hole Diameter: 7/8 inches (22 mm)
- Maximum Counter Thickness: 1 3/8 inches (35 mm)
- Bottle Height: 10 inches (255 mm)
- Bottle Diameter: 3 3/4 inches (95 mm)
- Below Counter Dispenser Body Height: Approximately 5 1/2 inches (140 mm)
- Dimensions: 6 1/4 inches (160 mm) x 3 1/2 inches (90 mm)
|
|
|
 |
|
 |
|
