Fontana Bolln Champagne Single Function Universal Rain Round Shower Head FAQ
Inlet Sealing, Spray-Chamber Purging; Champagne Finish Preservation
The Fontana Bolln Champagne universal rain shower head combines an 11-3/4-inch round metal spray face, single-function rainfall delivery, a rated 2.5 GPM flow rate, an adjustable swivel inlet, and compatibility with standard U.S. shower plumbing connections.
How should thread sealant be applied at the shower-head inlet?
Wrap approved PTFE tape evenly in the tightening direction without allowing excess material to extend into the waterway. Intruding tape fragments can detach during operation, migrate into the spray chamber, and restrict individual rainfall outlets.
Why should trapped air be purged before evaluating the rainfall pattern?
Air pockets inside the large distribution chamber can temporarily produce sputtering, delayed perimeter discharge, or irregular spray density. Run the shower continuously until the stream stabilizes before diagnosing pressure balance or nozzle performance.
What should be checked when the shower head slowly rotates after positioning?
Confirm that the swivel joint is correctly seated, the shower arm is rigidly supported, and the head is not being pulled off-axis by a misaligned threaded connection. Persistent movement may indicate excessive leverage or insufficient joint friction rather than a flow problem.
How should the Champagne finish be protected during installation and routine cleaning?
Use a padded wrench only at the designated inlet flats and keep tools away from the decorative surface. For cleaning, use a soft microfiber cloth with diluted neutral soap and avoid acidic descalers, bleach, abrasive pads, polishing compounds, and metal brushes.
