Fontana Brushed Gold Shut-Off Douchette FAQ
G1/2 Connection, 49.21-Inch Hose & Shut-Off Valve Commissioning
This brushed gold wall-mounted douchette integrates a handheld spray head, local shut-off control,
flexible 49.21-inch hose, and standard G1/2 inlet connection for controlled commercial washdown use.
How should the G1/2 supply connection be sealed and tested?
Apply a plumbing-compatible thread sealant without obstructing the inlet passage, tighten the wall connection without overloading the finished escutcheon, and pressure-test the joint before placing the hose and spray head into service.
How should the local shut-off control be commissioned?
Open the upstream supply gradually, cycle the control through its full operating range, and confirm complete shut-off without continued discharge, valve chatter, or leakage around the control stem and wall connection.
What should be checked before connecting the 49.21-inch hose?
Flush the branch line to remove construction debris, inspect both hose washers, verify that the hose is not twisted, and maintain a bend radius that prevents kinking or tensile loading at either threaded connection.
How should the handheld spray head be inspected during commissioning?
Confirm uniform discharge through the spray-face openings, test the trigger and shut-off response repeatedly, and inspect the 0.87-inch spray head, 0.79-inch body, hose unions, and wall bracket for leakage or movement.
