Fontana Lyon Rose Gold Wall-Mounted Shower Head FAQ
2.5 GPM Validation, Wall-Arm Alignment & Rainfall Spray Commissioning
This rose gold square wall-mounted shower head combines
corrosion-resistant stainless-steel construction, a 7-11/16-inch
rainfall spray face, a single-function 2.5 GPM discharge, and a
standard 1/2-inch threaded connection for modern shower installations.
How should the shower branch be prepared before installing the finished head?
Flush the open wall arm until solder residue, pipe scale,
construction debris, and excess sealing compound are completely
discharged. Inspect the 1/2-inch threaded outlet and confirm that
the arm remains rigid, level, and free from damaged threads.
How should the square spray face be aligned without damaging the finish?
Support the shower arm during final tightening and use protected
tools only on approved gripping surfaces. Level the square spray
face relative to the finished wall while avoiding excessive torque,
lateral loading, or direct tool contact with the rose gold finish.
How should the specified 2.5 GPM discharge be verified onsite?
Stabilize the supply pressure, purge entrained air, and complete a
timed volumetric collection test at the shower head. A lower result
may indicate branch-line pressure loss, debris restriction, mineral
accumulation, or obstruction within the internal flow path.
What confirms successful rainfall spray commissioning?
Confirm consistent distribution across the full 7-11/16-inch spray
field without inactive outlets, weak perimeter zones, pulsing,
side jetting, or irregular droplet formation. Uneven coverage
normally requires additional flushing or individual nozzle cleaning.
