Fontana Verona Matte Black Touchless Faucet FAQ
Optical Sensor Validation, Solenoid Isolation & Mixed-Water Commissioning
This matte black deck-mounted touchless basin faucet combines motion-sensor
activation, single-hole installation, hot-and-cold mixing, and a ceramic valve core.
How should the optical sensor be validated against the completed basin?
Test activation from multiple hand-entry positions after the basin, backsplash, mirror, and accessories are installed, confirming reliable detection without false triggering from reflective surfaces or standing water.
How should the supply branches be prepared before connecting the solenoid assembly?
Flush the hot and cold branches independently until construction debris is removed, verify inlet orientation, clean any strainers, and prevent sediment from entering the ceramic mixer, solenoid valve, or internal waterways.
What should be checked during repeated solenoid-cycle testing?
Operate several consecutive activation cycles and confirm prompt opening and closure without valve chatter, delayed shutoff, residual dripping, intermittent flow, pressure-induced cycling, or unintended sensor reactivation.
How should the mixed-water discharge be commissioned?
Open both isolation valves gradually, adjust the hot-and-cold mixing control through its usable range, verify stable discharge temperature, and inspect the mixer body, hoses, and control connections for leakage.
