The Fontana Elyra Grace™ Series Chrome Smart Faucet is a revolutionary product that enhances both the functionality and the appearance of modern bathrooms. It is not only an innovative but also an artistic fixture, suited for places where there is a lot of people.
Sophisticated sensors catch hand movements and allow the fixture to operate in a non-contact mode thereby boosting hygiene. The product is made of high-quality brass and polished to a chrome mirror-like finish, thus it is a long-lasting and shining product. The ceramic valve core guarantees reliability and allows up to 700,000 activations for performance that is not interrupted. The system works under the pressure of 0.05–0.8 Mpa and thus, has a constant flow of 1.5 GPM. The faucet is powered by a DC 6V power supply from four AA alkaline batteries so there is no need for any external wiring. The sensor can detect a 30cm range, which means that it can easily identify movements and will always supply water output under control. The Fontana Elyra Grace™ Series, being an excellent combination of technology and aesthetics, is also the perfect choice for public restrooms. It is, therefore, a user-friendly, eco-friendly, and stylish product all at once.
ELYRA GRACE™ SERIES
Fontana Elyra Grace Touchless Faucet FAQs
Deck-mounted touchless faucet with solid brass construction,
ceramic valve control, hot-cold water delivery, and 2.2 GPM flow.
✥
Sensor Detection Range?
+
The infrared sensing system provides detection up to
approximately 30 cm. During commissioning, verify reliable
activation within the intended handwashing zone and confirm
nearby reflective surfaces do not cause unintended triggering.
◇
Installation Configuration?
+
The Elyra Grace is designed for deck-mounted, single-hole
installation. Confirm adequate countertop clearance, secure
fixture mounting, accessible service space below the basin,
and proper alignment before connecting the water supply.
◯
Flow Rate Verification?
+
The published technical specification lists approximately
2.2 GPM, or 8.32 L/min, at 60 PSI. If output is restricted,
inspect supply pressure, inlet connections, outlet components,
and the water pathway for debris or mineral accumulation.
↻
Ceramic Valve Service Life?
+
The faucet uses a ceramic valve core and is specified for
approximately 500,000 opening and closing cycles. Periodic
inspection and clean supply conditions help maintain reliable
sealing and consistent water-control performance.
⌁
Operating Water Pressure?
+
The published operating range is approximately 0.05–0.8 MPa.
Maintain stable dynamic pressure within the specified range,
regulate excessive pressure where necessary, and verify adequate
pressure during commissioning.
⌂
Hot and Cold Water Capability?
+
Yes. The Elyra Grace is configured for hot and cold water
operation. Confirm both supply connections are correctly
installed and flushed before commissioning to support controlled
temperature delivery and consistent hydraulic performance.
⚡
Power Supply Configuration?
+
The product description specifies a DC 6V power supply using
four AA alkaline batteries. Verify correct battery orientation,
secure electrical connections, and stable sensor operation before
placing the faucet into service.
⌕
Compliance and Accessibility?
+
The published certifications include cUPC, WaterSense,
NSF/ANSI 61, NSF/ANSI 372, ADA, CEC, CALGreen,
ASME A112.18.1, and CSA B125.1. Final installation should
still follow applicable project and local code requirements.
‹
›
Chrome
◇
Solid Brass
Fixture Construction
⌁
Infrared Sensor
Touchless Activation
⚙
Ceramic Valve
500K Cycle Rating
◇
ADA Compliant
Accessible Operation
Minor Compromise 
