Fontana LeoWave Collection Deck Mounted Twin Contact Free Faucet And Soap Dispenser in Matte Black
With a progressive and stylish design, the Fontana LeoWave™ Collection – Matte Black is an advanced solution for hygienic hand washing. The dual-function fixture, offers styish water and soap dispensing into a single smart-activated feature with the rich matte black finish that compliments any high-end restroom application. It is made of solid cast brass. The motion activated faucet provides a completely touchless experience since no need to operate faucets or controls makes it more difficult or impossible when electrodes are installed. The motion sensor faucet uses a patented motion sensor system that allows for the hand soap to be provided in the same fixture with the added benefit of AC/DC hardwired, or battery operation with four AA alkaline cells. The ideal installation could be accomplished at locations that incorporates standard US plumbing, with operation pressure from 10 to 125 psi (0.5–7.0 KGS/cm²). As a result, installations are easily deployed in most commercial environments. The motion sensors utilize a built-in microcomputer to detect the shape and color surrounding the sensor and automatically adjusts the detection zone. An advanced, AI infrared chip inside ensures activation is complete, smooth, and drip-free. The automatic faucet and soap dispenser is suitable for busy -tough to disinfect- public restrooms, offices, healthcare environments, restaurants, and other commercial operations. Overall, this automatic faucet effortlessly blends timeless functionality with visual appeal into the user experience.
Fontana LeoWave™ Matte Black Touchless Faucet & Automatic Soap Dispenser FAQ
AI Infrared Smart-Chip, 30-Second Auto Shutoff;
10–125 PSI Operation & AC/DC Commercial Power
The Fontana LeoWave™ Matte Black touchless faucet and automatic soap dispenser
combines solid-brass construction with independent contact-free water and soap
delivery for high-traffic commercial restrooms. The system features AI infrared
smart-chip sensing, automatic detection-zone adjustment, a 30-second faucet
auto-shutoff, 10–125 PSI operating pressure, selectable 0.5–1.5 GPM water flow,
a water-resistant solenoid enclosure, and AC 110 V or DC 6 V power capability.
How should the faucet and soap-dispenser sensor zones be commissioned?
Complete commissioning after the basin, countertop, backsplash, mirror,
lighting, and surrounding accessories are installed. Test the faucet and
soap dispenser independently from normal hand-washing positions and confirm
that each infrared sensor activates only its intended function. The built-in
microcomputer automatically adjusts the detection zone according to the
surrounding lavatory color and geometry, so final testing should be performed
under actual installed conditions. Verify reliable activation, prompt valve
response, and no cross-triggering between the water and soap sensor zones.
How should the 10–125 PSI operating pressure and 0.5–1.5 GPM flow be commissioned?
Flush the supply piping before final connection and verify that dynamic water
pressure remains within the specified 10–125 PSI operating range. Cycle the
faucet repeatedly and confirm stable sensor-controlled opening and complete
shutoff. The system supports available flow rates from 0.5 to 1.5 GPM, so
confirm that the selected flow configuration satisfies the project's water-use
requirements. Weak or irregular discharge should prompt inspection of supply
valves, hoses, strainers, aerator passages, and the solenoid water path for
restrictions before electronic components are replaced.
How should the AC 110 V and DC 6 V power options be coordinated for commercial installation?
Determine the intended power strategy before closing accessible service areas.
The system supports AC 110 V and DC 6 V operation, allowing hardwired power
or battery-based operation where appropriate. Keep electrical connections and
the water-resistant solenoid enclosure accessible for maintenance and separated
from potential plumbing or soap leakage. After energizing the system, perform
repeated faucet and dispenser activation cycles and verify consistent sensor,
solenoid, and automatic shutoff operation before placing the restroom into service.
What should be checked if the faucet remains active or develops intermittent sensor operation?
First clean the infrared sensor window and remove soap film, mineral residue,
or other contamination that may interfere with detection. Confirm that nearby
reflective surfaces or accessories are not affecting the automatically adjusted
sensing zone. Check AC/DC power stability, wiring connections, supply pressure,
and the water-resistant solenoid enclosure. The faucet incorporates a 30-second
automatic shutoff, so operation continuing beyond the expected cycle should
prompt inspection of sensor conditions, power supply, and solenoid response
before the control assembly is replaced.
- Brand Name: FontanaShowers®
- Model Number: FST9892MB
- Finish: Matte Black
- Materials: Solid Brass
- Sensor Type: Sensitive
- Infrared: AI Smart-Chip
- Auto Shutoff: 30 Seconds
- Water Pressure: 0.5-7.0 KGS /cm, 10-125 PSI
- Waterflow: Available Flow Rate From 0.5 to 1.5 GPM
- Installation Manual: Included
- Solenoid Enclosure: Water resistant
- Hoses & Accessories: Included
- Power Supply: AC 110 V and DC 6 V (batteries not included)
- Power Option: AC/DC
- Compliance: ADA
- Usage: Commercial Application for High Traffic Restrooms
Eco-Efficient Matte Black Touchless Faucet & Soap Dispenser
|
Black Eco 
