How to install Saiyue Dual Handles Gold & Black Widespread Bathroom Sink Faucet | FS-30168
Easy step by steps installation instructions for Faucet
Visit Product Page
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the products for any shipping damages. If you find damages, do not install.
Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
sensor
Faucet Installations Instructions
Size:
faucet
Step 1:
Step 2:
faucet
Step 3:
Step 4:
Step 5:
Step 6:
1. Ensure that the water supply below your sink is completely shut off by turning the valve all the way to the right. 2. Remove the T-connector from the spout in order. Set the parts aside. 3. Insert the spout into the prepared center mounting hole. From below, Slide one of the provided rubber gaskets onto the threaded shank, followed by the metal washer. Secure the spout to the surface using the lock nut. Tighten firmly with a basin wrench. 4. Reattach the T-connector to the spout in the reverse order of its removal. Ensure that the rubber o-ring is seated properly and that the nut is tightened firmly using an adjustable wrench. 5. Thread one of the provided lock nuts onto each of the valve stems. Thread to the bottom of each stem. Slide one of the provided plastic washers, followed by a rubber washer, onto each stem as well. 6. One of the faucet’s valve stems are for ‘hot water'. Install the ‘hot’ handle into the deck. 7. From beneath the sink, hand tighten the lock nut. Finish tightening using a basin wrench. 8. Repeat steps 6-7 to install the ‘cold’ valve stem into the right-side faucet hole. 9. Use the provided braided water lines to connect the hot and cold valve stems to the T-connector. Use an adjustable wrench to tighten, but be careful not to overtighten. Apply thread sealant or plumber’s tape to each threaded connection before attaching. 10. Connect the main water supply lines to the valve stems. Apply plumber’s tape or thread sealant to the threads before tightening. 11. Turn the faucet on and allow the water to flow for approximately 60 seconds. Ensure that there are no leaks and that both hot and cold water is running properly.
Flexible Connecting Hose Care must be taken when connecting the flexible connection hose from the power supply box to the spout to ensure it does not bend sharply and kink or twist. See above for recommended ways to fit the flexible connecting hose.
Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connection hose.
Saiyue Dual Handles Gold & Black Widespread Bathroom Sink Faucet
Brand new modern Contemporary Oil Rubbed Bronze Centerset Vanity Sink Lavatory Faucet. Premium quality. This has an elegant design and elevates the appeal of your decor made from the highest quality and for great tastes. Give your bathroom an elegant glance. Double handle operation. Durable brass body construction. Smooth, long-lasting, and drip-free 1/4 turn operation ceramic disc cartridge. Standard sized US plumbing & connections.
