Home > Installation Instructions for Fontana LED Glass Multiple Color Changed Bathroom Sink Faucet

How to install Fontana LED Glass Multiple Color Changing Bathroom Sink Faucet | FSLS13A


Easy step by steps Installation Instructions for Hot & Cold LED Bathroom Faucet

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
sensor
LED Glass Multiple Color Changing Bathroom Sink Faucet Installation

Faucet Installations Instructions



Size:
Power source: Battery operated LED
Flow Rate: 2 GPM (7.57 L/min) The LED waterfall tap is cool and at the same time many fun. A beautiful modern shaped fitting that is also very easy to install.
Thanks to the combination of glass and metal, the tap is really great.
The colour changing water jet effect is a small special point and the bathroom tap also makes the bathroom more attractive.

Washbasin tap with RGB 3 colour changes.
Basin tap with LED technology, the colour change depends on the water temperature.
Great for children who can then wash their hands for longer and orientate themselves in colour rather than scalding.
LED colour: blue, green and red.
Blue: ≤ 34°C.
Green: 34°C - 44°C.
Red: 44°C - 54°C
Red flashing: from 55 °C – scalding protection.

Brass material and glass finish.
The main body is made of lead-free H59A brass, which is healthy and durable.
Chrome finish can prevent sink tap rust.
The waterfall spout is made of durable glass. In order to ensure the long-term use of the bathroom fittings, we recommend that you clean the fitting on a regular basis.

Technical data
Distance between mounting holes: 32 mm - 35 mm.
Thickness of mounting plate: ≤ 40 mm.
3 bar flow rate: 6.9 GPM (26.1 l/min)


Battery compartment
The LED light is powered by 4 x AA batteries and turns on automatically when the tap is running.
(You can buy the battery yourself.)
The tap requires little power and lasts up to four months. You can hide it in the cabinet or under the sink.

35 mm ceramic cartridge
Replaceable cartridge: KTW tested SEDAL ceramic cartridge.
Reliable cartridge for precise control of water temperature and volume.
Easy to replace filter element with durable ceramic gasket
DVGW tested stainless steel hose
Connection type: flexible 3/8 inch connection hoses








Step 1: Step 2:
sensor




Step 3: Flush debris from waterpipes Step 4:



Step 5: (Correct way for Hose)





Before installing your new mixer, flush through the pipework to ensure removal of debris, turn off the water supply.

Ensure the ‘O’ ring is in place at the bottom of the mixer body.

Push the control cable down through the hole and position the mixer on the basin. From the underside of the basin fit the rubber washer, metal washer onto the threaded tube followed by the nut. Tighten the nut to clamp the mixer to the basin. Tighten the 2 side screws up onto the washer.

CAUTION: Do not over tighten the nut/bolts as this may damage the basin.

Screw the two flexible pipes to the mixer body, but do not over tighten, hand tighten only.

Connect the water supply to the inlet pipes.

Plug together the connectors coming from the mixer to the battery box. Line up the flats on both the plug and socket and firmly push together.



Flexible Connecting Hose

Care must be taken when connecting the flexible connection hose from the power supply box to the spout to ensure it does not bend sharply and kink or twist.
See above for recommended ways to fit the flexible connecting hose.

Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connection hose.







Fontana LED Glass Multiple Color Changed Bathroom Sink Faucet


Fontana LED Glass Multiple Color Changed Bathroom Sink Faucet. Inside led light will change color when water temperature will change. There is a micromoto inside the faucet and it can supply power to led light forever when water flowing. We gained high reputation with the good quality and best service from the customers. Perfect solution for bathroom. Certified by quality standards, no hard to human, water or environment. Easy to use and leak free. Extended durability ensured by solid construction, Stylish appearance. Self powered by water pressure-No battery or other electricity required. When water flows down, the LED will light instantly and automatically.

Features:

  • Brand Name: FontanaShowers
  • Model Number: FSLS13A
  • Type: LED Sink Faucet
  • Surface Finish: Chrome
  • Surface Treatment: Polished
  • Faucet Mount: Single Hole
  • Installation Type: Deck Mount
  • Number of Handles: Single Handle
  • Style: Contemporary
  • Valve Core Material: Ceramic
  • Material: brass body and zinc alloy
  • Water pressure: 0.2Bar~0.8Bar
LED Glass Multiple Color Changing Bathroom Sink Faucet Installation


Shower & Faucet Installation Instructions