Home > Installation Instructions Fontana Kitchen Sink Faucet Invisible Pull Out Sprayer Double Hole Single Handle Brushed Nickel Hot And Cold Solid Brass Mixer Tap

How to install Fontana Kitchen Sink Faucet Invisible Pull Out Sprayer Double Hole Single Handle Brushed Nickel Hot And Cold Solid Brass Mixer Tap | FS1543N

Easy step by steps installation instructions for Sensor Faucet		Visit Product Page
Before you begin, please read the installation instructions below. Observe all local building and safety codes. Unpack and inspect the products for any shipping damages. If you find damages, do not install. Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.	sensor

Kitchen Sink Faucet Installations

Size:
	sesr

Step 1:		Step 2:
	sensor

Step 3:		Step 4:


Step 5:		Step 6:

1. Ensure that the water supply below your sink is completely shut off by turning the valve all the way to the right.

2. Insert the spout into the prepared center mounting hole. From below, Slide one of the provided rubber gaskets onto the threaded shank, followed by the metal washer. Secure the spout to the surface using the lock nut. Tighten firmly with a basin wrench.

3. Thread the provided lock nut onto each of the mixer stems, slide one of the provided washers as well.

4. Use the provided water lines to connect the hot and cold inlets and faucet outlet. Be careful not to overtighten.

5. Connect the hot and cold pipelines to the main water supply lines. Apply plumber’s tape or thread sealant to the threads before tightening.

6. Attach the mixed water pipeline to the faucet.

7. Turn the faucet on and allow the water to flow for approximately 60 seconds. Ensure that there are no leaks and that both hot and cold water are running properly.

Flexible Connecting Hose

Care must be taken when connecting the flexible connection hose from the power supply box to the spout to ensure it does not bend sharply and kink or twist.

See above for recommended ways to fit the flexible connecting hose.

Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connection hose.

Fontana Yellow Gold Commercial Automatic Sensor Touchless Faucet

If your taste is more on the modern and stylish side of things, then you can never go wrong with the Infrared Automatic Sensor Faucet with Digital Display. This faucet boasts of a sleek silvery chrome finish with a fun and quirky top panel to create a vibrant and modern look that will surely complement any contemporary bathroom setting. The design is just the tip of the iceberg though, since this faucet has so much more to offer, especially in terms of functionality. Harnessing the latest technologies developed in the bathroom fixture industry, this faucet incorporates an awesome touchless feature, operating with the use of a state-of-the-art motion sensor. Just put your hands under the spout and a stream of water is sure to flow. This faucet also sports a clear digital display that shows you the water's temperature and, yes, it is capable of both hot and cold water. Not all faucets were made equal, and the Infrared Automatic Sensor Faucet with all its features most definitely stands out as one of the best in its class!