Home > Installation Instructions For Fontana Genoa Sandino Thermostatic Ceiling Mount Rainfall LED Shower Set

Fontana Genoa Sandino Thermostatic Ceiling Mount Rain Fall LED Shower Set

Sandino is a modern shower set, perfectly fit for stylish bathrooms that aim to impress. It comes with a complementary hand held shower and a thermostatic high flow valve that allows you to switch between the two. The LED lights are a nice addition that will help you set the mood while indicating the water temperature, as they change the color accordingly. They do not require any electrical connection, as they are powered by the water flow. The rainfall shower is ceiling mount, 20x40 inches. Only the best materials have been used – the shower head is made of stainless steel and the valve comes with ceramic core material for a long lasting life time. It comes complete with accessories and installation instructions.

Fontana Genoa Sandino Thermostatic Ceiling Mount Rain Fall LED Shower Set features:

  • Type: Shower Set
  • Size: 15.7 inches ( >40 cm)
  • Style : Contemporary
  • Number of Handles : Dual Handle
  • Surface Treatment : Brushed
  • Valve Core Material : Ceramic
  • Surface Finish : Stainless Steel
  • Feature : Thermostatic Faucets,LED Light
  • Installation Type : Ceiling Mount
  • Size : 20*40 inch
  • Connection Size : G1/2"
Fontana Genoa Sandino Thermostatic Ceiling Mount Rain Fall LED Shower Set

FontanaShowers®Product Warranty InformationFontanaShowers Product Warranty
Before you begin, please read the installation instructions below. Observe all local building and safety codes.

  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.


shower

Shower Head Installation Instructions


Shower Head Installation Instructions Shower Parts
Shower Head Installation Instructions

Connect pipe 1 with decorative cover

Step 1: shower Step 2:
Draw the holes on the ceiling according to the Decorative Cover and pipes. Drill the holes on the ceiling according to the hole specification and install 4 pipes.
Shower Head Installation Instructions
Step 3: Step 4:
Put the screw bolts through the hole on the side to lock pipes. Install the four-pipes on the showerhead.

Shower Head Installation Instructions
Step 5: Step 6:
Shower Head Installation Instructions


1. Mark the fixing positions and drill holes to suit the anchors.
2. Install the anchors and fix the mounting bar to the ceiling with screws.
3. Screw the shower bars into the shower head tightly.
4. Attach the shower bar to the mounting bar and fix screws and nuts to lock shower bar with mountthe ing bar at the desired height.
5. Add screen washers. Screw shower hose (not included) to the water inlet on the showerhead and then to the water outlet in the ceiling.
Showerhead Installation Instructions

Hand-Held Shower Installation Instructions


Step 1: Step 2: Step 3 & 4:
Hand
Held
Shower
Hand
Held
Shower
Handheld Shower Handheld Shower Handheld Shower
Step 5: Step 6 & 7: Step 8:


1. Gather All Parts

2. Hole Locations For Wall Mount
Remove Front Cover (A) from Wall Mount (B). Use Wall Mount Screw Holes (C) to place the desired location. Using a punch or awl, tap the screw hole locations. Holes must be vertically aligned.

3. Anchor Installation
Drill two 1/4” dia. Holes (A). If installing into a studs drill two 1/8” dia. holes and do not use Anchors (B). Insert Anchors (B) into Holes (A) and tap flush with the wall.

4. Wall Mount Installation
Place Wall Mount (A) into wall and inset Mounting Screws (B) through Wall Mount Holes (C) and tighten until Wall Mount (A) is flush with the wall. Do Not Over Tighten! Insert Front Cover (D) into Wall Mount (A)

5. Drop Elbow & Hose Installation
Apply PTFE plumbers tape on both ends of Pipe Nipple (A) (not included). Screw Pipe Nipple (A) into the elbow inside the wall. The Pipe Nipple (A) is to project 1/4” – 3/4” from the finished wall. Screw Drop Elbow (B) onto Pipe Nipple (A) and tighten until Drop Elbow (B) is property positioned and flush to the finished wall. Place Rubber Seal (C) inside Hex Hose Fitting (D). Connect Hex Hose Fitting (D) into Drop Elbow Outlet (E) by turning Hex Hose Fitting (D).

6. Unit Startup
Turn on hot and cold water supplies, and check all connections for leaks.

7. Final Flushing
For final flushing, turn the valve on and allow water to run through the Hose (A) for several minutes. Allow water to run for several minutes until all foreign matter clears the line.

8. Shower Arm Installation
Place Rubber Seal (A) inside Tapered Hose Fitting (B). Conned Hand Shower (C) to Hose (D) by turning Tapered Hose Fitting (B ) clockwise. Warning: Make sure Hand Shower (C) is securely tightened to Hose (D).
HandHeld Shower Installation Instructions

Thermostatic Mixer Installation Instructions


Step 1: Step 2:
Mixer Valve


Mixer Control Valve Installation Instructions
Step 3: Step 4:



Mixer Control Valve Installation Instruction
Step 5: Step 6:



Mixer Control Valve Installation Instruction
Step 7: Step 8:


Mixer Control Valve Installation Instruction
Step 9:
Mixer Control Valve Installation Instruction

How to install the Shower Set with Wall Mount Showerhead, Hand Held Shower and Shower Mixer


BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions