Crafted for modern sensor-activated convenience, this Fontana Rio™ Antique Brass Smart Sensor Tap was designed especially for discerning commercial environments, intended to ensure hygiene efficacy, durability, and nonstop operation are kept at a level exceeding the client's needs. A champagne pearl finish strikes you with a delicate metallic sheen, and it is appealing and designed for modern washroom environments; at the same time, the surface is harsh against corrosion, moisture penetration, and daily activity.
Sculpted of or with brass throughout the body, valve housing, and spout, the product will translate into durability over many years and will feature smooth water control and even performance for high-visibility sites. With practical functionality, installation becomes extremely pleasant with a single-hole deck-mounted design and motion-detecting zone factory-adjusted at 250 mm to give rise to free effective hand-free operation right up to dynamic water-saving suitability design. Maintains a nice balance between assurance of performance and responsibility, i.e., at a minimum water pressure of 0.05 to maximum 0.7 MPa and under standardized flow conditions by the control of the quantity of flow at 1.3 GPM. Compatibility with two power supplies, such as AC110V with DC 6V backup, smoothes out the operation issues that might be encountered with varying infrastructure inputs to support virtually uninterrupted usability. To ensure integrity especially for moderate to high protection, the unit bears an IP56 protection rating and shall withstand ambient temperatures between 1 and 45°C. It is sure to meet ADA compliance requirements for a hands-off design free from brands and logos and designed mainly for use in commercial washrooms. The confidence-inspiring reliability of the fixture just makes the Rio™ stand out as a smart, reliable touchless faucet unit for modern washroom hygiene plus an invigorating touch in the hygienic ambience.
