Home > Bravat Light Oil Rubbed Bronze Shower Set Installation Instructions

Bravat Light Oil Rubbed Bronze Shower Set With Thermostatic Valve Mixer 3-Way Concealed Wall Mounted

The Bravat Light Oil Rubbed Bronze Shower Set With Thermostatic Valve Mixer 3-Way Concealed Wall Mounted is one of the most trendiest finishes across decor styles in the bathroom. It has a contemporary style with a beautiful Light Oil Rubbed Bronze finish. When it comes to new bathroom upgrades, FontanaShowers is offering shape, finishes and styles that you've looking for.

Bravat Light Oil Rubbed Bronze Shower Valve Mixer 3-Way Concealed Wall Mounted Features:

Brand Name: FontanaShowers

Model Number: FS1064

Type: Shower Set & Shower Mixer

Style: Contemporary

Type: Fixed Support Type

Surface Finish: Light Oil Rubbed Bronze

Installation Type: Wall Mount

Number of Jets: Four

Control Type: Single Holder Dual Control

Size: 7.91"-11.85" (201-300mm)

Surface Treatment: Polished

Valve Core Material: Ceramic

Bath Shower Type: In-Wall Shower Mixer

Valve Type: Ceramic Valve

Faucet Handle Material: Zinc Alloy

Mixer Body Material: Brass

Valve Included: Yes

Embedment Depth: 2.16" (55mm)

Valve Panel Dimension: 6.29"x6.29" (160x160mm)

Connector: G1/2"B (Standard)

Bravat Light Oil Rubbed Bronze Shower Set With Valve Mixer 3-Way Concealed Wall Mounted

FontanaShowersÂ®Product Warranty Information

Before you begin, please read the installation instructions below. Observe all local building and safety codes.

Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.

shower

Shower Head Installation Instructions

	Shower Head Parts Included: Wall Mounting Arm Locking nut Wall trim Shower arm Showerhead Fixing screws and wall plugs (not shown

	Step 1:		Step 2:		Step 3:
Shower	Wall Mount Round Showerhead	Shower		Shower

	Wall Mount Round Showerhead
	Step 4:		Step 5:		Step 6:
	Wall Mount Round Showerhead

1. Remove the old shower head by using the channel lock pliers. Be sure to turn the pliers counter-clockwise to loosen the old shower head. (Tip: Right is tight, left is loose.)

2. Remove the shower arm by turning it by hand counter-clockwise. Make sure you remember to apply putty or tape to the new arm. (Tip: Using Teflon tape is less messy)

3. Apply Teflon tape to the threading of the shower arm by wrapping it around the threads, go all the way around 3 or 4 times depending on the quality of the Teflon tape.

4. Install the new shower arm by going clockwise by hand until it is tight, then put painters tape around the arm and tighten the arm with the channel lock or monkey wrench.

5. Place Teflon tape around the threads on the shower head and then place the shower head onto the shower arm by turning the shower head clockwise after the shower arm is already in the wall.