Bravat Brushed Gold Square Shower Set With Valve Mixer 3-Way Concealed Wall Mounted
The Bravat Brushed Gold Square Shower Set With Thermostatic Valve Mixer 3-Way Concealed Wall Mounted is one of the most trendiest finishes across decor styles in the bathroom. It has a contemporary style with a beautiful Brushed Gold finish. When it comes to new bathroom upgrades, FontanaShowers is offering shape, finishes and styles that you've looking for.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
shower
shower
Shower Head Installation
Shower Head Parts Included:
Shower Head Parts Included:
Wall Mounting Arm
Locking nut
Wall trim
Shower arm
Showerhead
Fixing screws and wall plugs (not shown)
shower
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Use your hands counter clockwise to unscrew the old showerhead and removed it.
Take out the showerhead, make sure the shower filter is placed in the connector.
Ensure the showerhead full horizontal alignment wall mounted shower arm thread.
Use your hands clockwise to tighten showerhead..
HandHeld Shower Installation Instructions
Hand-Held Shower Installation Instructions
Hand Held Shower
Parts: Hose Sidebar Slider Handshower Plug Button
Hand Held Shower
hand held shower
Open the closed cover of the shower holder and take out the screws.
Drill two holes size 0.2" (6mm) on the wall according to the hole position of the shower holder.
Use a hammer to break 2 plastic wall plug into two holes. Tighten the screws with the plastic wall plug and locking with the shower holder. Then install the closed cover.
Connect the shower hose with the water outlet connection part and hand shower. Plug the hand shower in the shower holder.
Body Sprays Installation Instructions
Shower Body Jets Installation Instructions
Body Sprays Installation Instructions
Step 1:
Step 2:
Step 3:
Body
Sprays
Body Sprays
Set the decorative cover on the body jet.
Roll the raw material belt in the thread screws.
Use a wrench to tighten 6 body jets
on the water outlet holes in a clockwise direction.