Bravat Thermostatic Brushed Gold Waterfall & Rainfall Shower Set
This Bravat Brushed Gold Waterfall & Rainfall Shower Set is wall mount shower with brushed gold plate finish, comes with a handheld shower and Bravat Mixer. When it comes to new bathroom upgrades, FontanaShowers is offering shape, finishes and styles that you've looking for. Give your bathroom an elegant glance with sink faucets and fixtures. This is one of the most trendiest finishes across decor styles in the bathroom. This has an elegant design and elevates the appeal of your decor made from the highest quality and for great tastes. It comes super seal technology inside, capable of delivering superior performance with a solid construction for long durability that will upgrade your bathroom with a modern and cool look for a long period of time.
Bravat Brushed Gold Waterfall & Rainfall Shower Set Features:
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
shower
Shower
Shower Head Installation Instructions
Shower Head Parts Included:
Wall Mounting Arm
Locking nut
Wall trim
Shower arm
Showerhead
Fixing screws and wall plugs
Shower Head Parts
Shower Head Parts
Step 1:
Step 2:
Showerhead
Wall Mount Showerhead
Step 3:
Step 4:
Wall Mount Showerhead
Step 5:
Step 6:
Wall Mount Showerhead
Step 7:
Step 8:
Wall Mount Showerhead
Step 9:
Step 10:
Wall Mount Showerhead
Step 11:
Step 12:
Wall Mount Showerhead
Step 13:
Step 14:
Wall Mount Showerhead
Step 15:
Step 16:
Wall Mount Showerhead
Step 17:
Step 18:
Wall Mount Showerhead
Step 19:
Step 20:
Wall Mount Showerhead
Step 21:
Step 22:
Wall Mount Showerhead
Step 23:
Step 24:
HandHeld Shower Installation Instructions
Hand-Held Shower Installation Instructions
Hand Held Shower
Parts: Hose Sidebar Slider Handshower Plug Button
Hand Held Shower
hand held shower
Open the closed cover of the shower holder and take out the screws.
Drill two holes size 0.2" (6mm) on the wall according to the hole position of the shower holder.
Use a hammer to break 2 plastic wall plug into two holes. Tighten the screws with the plastic wall plug and locking with the shower holder. Then install the closed cover.
Connect the shower hose with the water outlet connection part and hand shower. Plug the hand shower in the shower holder.
Thermostatic Mixer Installation Instructions
Step 1:
Step 2:
Thermostatic Mixer
Thermostatic Mixer
Step 3:
Step 4:
Thermostatic Mixer
Step 5:
Step 6:
Thermostatic Mixer
Step 7:
Basic-size, according to the embedded box to open the hole on solid wall, should consider installing the metope of the distance between 60-75mm, for example, after blank wall in the shop, the ceramic tile surface to increase the thickness of the 20 mm, so PiQiang in the depth of the hole should be chosen 40 to 55 mm.
Hole bottom should remain flat so that subsequent adjustment embedded box of vertical and horizontal convenient installation for the principle
Pay attention to the direction of the up and down or so embedded box, on the left by hot water pipes,
