Fontana Munich™ Matte Black Automatic Touchless Sensor Faucet FAQ
Infrared AI Sensor Activation, 0.05–1.2 MPa Operation;
AC/DC Power & Matte Black Surface Protection
The Fontana Munich™ Touchless Faucet combines solid-brass construction,
infrared sensing, automatic shutoff, and commercial deck-mounted operation.
How should the infrared sensor be commissioned after installation?
Complete commissioning after the basin, countertop, mirror, lighting,
and surrounding accessories are installed. Test repeated hand-entry
and withdrawal cycles and confirm reliable activation and automatic
shutoff. Check reflective surfaces for unintended sensor triggering
before final handover.
How should the 0.05–1.2 MPa operating pressure be checked?
Flush the supply piping before final connection and verify pressure
within the specified 0.05–1.2 MPa range. Perform repeated sensor cycles
and confirm stable discharge. If flow becomes restricted, inspect the
supply path and outlet before servicing the electronic components.
How should the 6.69-inch spout length be coordinated with the basin?
Establish the single-hole mounting position against the actual basin.
The faucet is approximately 5.51 inches high with a 6.69-inch spout
length. Confirm that discharge lands within the primary washing zone
while maintaining adequate hand clearance and splash control.
How should the Matte Black finish and sensor area be maintained?
Clean exposed surfaces with a soft damp microfiber cloth and dry them
afterward. Keep the infrared sensor and outlet free from soap film and
mineral deposits. Avoid abrasive pads, steel wool, acidic cleaners,
bleach, ammonia, and aggressive polishing compounds.
Arrived as promised and exactly as described. 
