Home > Installation Instructions for Fontana Agra Multi-Function Recessed Showerhead System

Fontana Agra Thermostatic Multi-Function Recessed Showerhead System

This state of the art, recessed showerhead provides rainfall, cascading waterfall and/or mist functions. Additionally, there is a "steady stream" function that comes out of the middle of the panel, much like a giant faucet. This is perfect for weary back and shoulder muscles. LED provides visual cues to water temperature. The modern design comes with a recessed rainfall showerhead and a handheld shower, cold and hot water shower mixer and an easy-to-use mixer valve, made from high-quality stainless steel material. Turn on the fun in your shower just by turning on the water, the lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and light.

Fontana Agra Thermostatic Multi-Function Recessed Showerhead System Features:

  • Brand Name: FontanaShowers
  • Model Number: FS-5928
  • Cold/Hot Water Control Type: Auto-Thermostat Control
  • Installation Type: Wall Mount
  • Quality: High Quality
  • Material: Stainless Steel
  • Shower Head Feature: LED 3 way function (Waterfall, rainfall, mist)
  • LED: Color changing Light
  • Shower Head Size: 27.5" x 14.9" (700x380mm)
  • Appearance: Recessed/Embedded Ceiling Shower Head
  • Finish: Chrome
  • Inclusion: Shower Head, Hand Shower, Mixer Valve
  • Fontana Agra Multi-Function Recessed Showerhead System
    FontanaShowers®Product Warranty InformationFontanaShowers Product Warranty
    • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
    • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
    • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
    showerhead

    Shower Head Installation Instructions

    Step 1: Step 2:
    showerhead
    Shower Head Installation Instructions
    Step 3: Step 4:
    Use a hexagon wrench to lose the lock screws then separate the showerhead assembly and bracket. Dig 4 Ø10 holes on the ceiling according to the dimension of the screws.
    Shower Head Installation Instructions
    Step 5: Step 6:
    Use a hammer to thwack the 4 screws into 4 holes.

    Install the bracket on the expansion screws then use copper sleeve wrench to lock 4 screws.
    Shower Head Installation Instructions
    Step 7: Step 8:

    Make sure all the water inlet pipe connected well without leaking before insert the power plug into the socket. Fix the shower assembly on the bracket by turn the locking bolt.

    Shower Head Installation Instructions
    Step 9:
    Shower Head Installation Instructions

    Shower Thermostatic Mixer & Hand Shower Installation Instructions


    Step 1: Step 2:
    Mixer Valve


    Mixer Control Valve Installation Instructions
    Step 3: Step 4:

    Connectors of Outlet Connectors of 2 inlets & 1 outlet.
    Mixer Control Valve Installation Instruction
    Step 5:

    Mixer

    First, carve a rectangular slot in the wall that 1000mm high from the ground and two inlet water pipeline (the overall height shall not be greater than 1670mm).

    Put the concealed box into the slot on the wall and fixed with the screws (no slipping, no loosening).

    Link the hot and cold water pipes, then tighten the screws (Attention: Filter washer must be installed to avoid dirt clogging), finally paste up the tiles as the picture shows.

    Link the hot and cold water pipes; accurately (please clean up the foreign body of connecting pipes installation, and hang up the preassembled panel components following the picture shows. (A must to all click into the B slot).

    NOTES

    1. Reasonable use of this product by technical parameters.
    2. The product temperature control valve is an automatic thermostatic valve, will not be affected by the temperature change under normal using any of the following circumstances that may affect the use.
    3. Low water pressure.
    4. The hot water inlet temperature is lower than 38 degrees.
    5. Cold aster temperature is too low.
    6. Used with the gas water heater.

    Special note: If the cold water pipe suddenly anhydrous, the thermostatic valve will automatically switch to stop the water, avoid the hot to bodily harm.

    For more rational use of this product. Here recommended the storage-type electric water heater. Maintenance considerations:

    1. After the installation, please dredge it with cold aster and repeat opening and closing to make sure the installation meets the requirements and no irregularities, then use the hot water.
    2. It only allows using a soft cloth to clean the water stains and dirt on the surface of the panel.
    3. Not use any acidic or alkaline cleaners or will corrode the surface.
    4. While the water is highly contaminated. Please stop using to avoid plug the water hole.
    5. If you encounter small shower water, please clean the filter gasket of the inlet valve.

    HandHeld Shower Installation Instruction

    How to install the Shower Set with Showerhead, Hand Held Shower and Shower Mixer

    BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions