Fontana Ala Cork Matte Black Basin Faucet FAQ
G1/2 Supply Flushing, Ceramic Valve Testing & Deck Alignment
This matte black widespread basin faucet combines a tall curved spout,
separate single-handle mixer, ceramic valve core, and G1/2 hot-and-cold connections.
What should be verified before cutting the countertop openings?
Check the approved drilling template, confirm adequate under-deck clearance for the spout and mixer mounting assemblies, and position the outlet over the basin drainage zone before creating either opening.
How should the hot and cold supply lines be flushed before connection?
Flush each G1/2 supply independently into a suitable container until debris is cleared, verify correct hot-and-cold orientation, and prevent sediment from entering the ceramic cartridge during final connection.
How should the ceramic mixing valve be tested during commissioning?
Open the isolation valves gradually, cycle the mixer through its complete temperature and flow range, confirm smooth cartridge movement, and inspect the valve body and threaded joints for leakage.
How should the tall spout be aligned before final tightening?
Center the 9.45-inch-reach outlet above the effective drainage area, verify that the 11.42-inch spout height controls splash, and tighten the mounting hardware without twisting the concealed supply tubing.
