DUOASTRYLIS™ BRUSHED GOLD CRYSTAL LINE
Fontana DuoAstrylis Brushed Gold Faucet FAQs
Brushed gold three-hole basin faucet with a 304 stainless-steel body,
brass valve core and dual crystal handles for independent hot/cold control.
✥
What Are the Three-Hole Rough-In Requirements?
+
The FS20026BG uses three separate mounting
openings for the central spout and two crystal
handle assemblies. Confirm hole center spacing,
mounting-surface thickness, clearance below
the deck and basin alignment against the
current manufacturer installation drawing
before countertop fabrication.
◇
How Is the Stainless-Steel Body Mounted?
+
The DuoAstrylis features a 304 stainless-steel
body with a brushed gold exterior finish.
Check the mounting seals, spout alignment
and fastening hardware during installation.
Protect the finished surfaces from tools,
and tighten the mounting components according
to the manufacturer's instructions.
◯
How Are the Dual Crystal Handles Commissioned?
+
The two crystal handles separately regulate
hot and cold water delivery. Verify correct
supply connection, smooth handle travel,
temperature adjustment and complete shutoff.
Confirm sufficient clearance between the
handles, central spout and surrounding
countertop accessories.
↻
What Should Be Checked for Valve Leakage?
+
Following installation, open both supplies
and examine accessible connections and valve
assemblies for leakage. Operate each handle
through several opening and closing cycles.
If dripping persists after closure, isolate
the supplies and inspect sealing components
for debris or wear.
⌁
How Is Water Pressure Verified?
+
Confirm that the hot and cold supply
pressures meet the current manufacturer's
operating requirements. Flush both supply
lines before connection and verify
consistent water delivery under normal
service conditions. Factory pressure-test
ratings must not be treated as continuous
operating-pressure limits.
⌂
How Is Spout-to-Basin Clearance Assessed?
+
Check the spout projection, mounting location,
basin depth and usable handwashing clearance
before final fastening. The outlet should
direct water into the basin rather than
onto the rim. Confirm the water impact
location and splash performance during
commissioning.
⚙
How Is the Brass Valve Core Maintained?
+
The faucet uses a brass valve core for
mechanical water regulation. If handle
resistance increases or water flow becomes
irregular, check the supply conditions
and valve assembly for contamination.
Isolate the hot and cold supplies before
servicing and use compatible replacement
components where required.
⌕
How Should the Brushed Gold Finish Be Cleaned?
+
Clean the brushed gold body and decorative
crystal handles with a soft damp cloth
and a manufacturer-compatible mild cleaner.
Avoid abrasive pads, acidic agents and
aggressive polishing compounds. Rinse
and dry the surfaces to reduce water
spotting and mineral accumulation.
‹
›
Brushed Gold
Brushed Gold
Chrome
Brushed Nickel
Gold
Rose Gold
Oil Rubbed Bronze
Champagne
Matte White
Matte Black
Gun Metal Gray
◇
304 Stainless
Faucet Body
✥
Crystal Handles
Dual Water Control
⚙
Brass Valve
Internal Regulation
⌂
Three-Hole
Deck Installation
↔
Hot & Cold
Independent Mixing