Here is a touchless faucet that will lift your bathroom experience a notch higher and also integrate all the fancy benefits this futuristic technology has to offer. The FontanaShower Nardov style bathroom faucet is crafted like a fine piece of jewelry for the very simple reason, that it won't go unnoticed. This deck-mounted single-hole, and the one-handled vessel sink faucet from Fontana will also be suitable no matter what kind of basin you had installed. Clad in a distinctly grey finish that brings with it an air of sophistication, this one-piece base is at home in bathrooms of every stripe. Its modern design is heightened by its clean lines and simplistic style faucet. With a ceramic valve core and type, this faucet allows for an uninterrupted and consistent operation that will withstand the test of time. An integrated LED light also adds a bit of visual bling, as well as some very useful lighting for those middle-of-the-night snack raids. It has a touch of modernity with the digital display that makes to keep in control of your water, its temperature as well and flow rate easily. Created by using the premier stainless steel on earth, this FontanaShower Nardov faucet for bathroom sinks is sturdy enough to have long-lasting performance and is easy to clean as it also resists tarnishing. wide x 6.22" tall, and a base to water outlet height of 5.31" ensuring an easy-to-install option accommodating everyday use Measuring 1.57 inches at the base, it installs securely and stably.

Fontana Nardov™ Gray Hot and Cold Touchless Basin Faucet FAQ

Digital Temperature Display, LED Feedback; Ceramic Valve Control & Gray Surface Protection

The Fontana Nardov™ Gray Hot and Cold Bathroom Touchless Basin Faucet combines brass construction with a stainless-steel housing, ceramic valve technology, touchless operation, and integrated digital temperature display. The single-hole deck-mounted faucet supports both hot and cold water, incorporates LED illumination, and measures 6.89 inches in length, 6.22 inches in overall height, 5.31 inches from the base to the water outlet, and 1.57 inches across the mounting base.

How should the digital display and touchless sensor be commissioned after installation?

Complete commissioning only after the basin, countertop, mirror, lighting, backsplash, and surrounding restroom accessories are fully installed. Test repeated hand-entry and withdrawal cycles from normal washing positions and confirm reliable touchless water activation and complete automatic shutoff. Operate both hot and cold supplies and verify that the digital display responds consistently as outlet-water temperature changes. Reflective surfaces and nearby movement should also be checked for unintended sensor activation.

How should the 6.89-inch faucet length and 5.31-inch outlet height be coordinated with the basin?

Establish the single-hole mounting centerline relative to the actual basin before drilling or final tightening. The 6.89-inch faucet length should position the outlet within the primary handwashing zone without directing water against the rear bowl wall, drain assembly, or shallow front edge. Confirm that the 5.31-inch base-to-outlet height and 6.22-inch overall height provide adequate hand clearance while maintaining controlled splash.

What should be checked if hot-and-cold flow or temperature indication becomes inconsistent?

Flush both hot and cold supply lines before final connection and verify unrestricted supply through the service connections. Inspect the ceramic valve, inlet paths, outlet passage, and supply lines for construction debris or restriction. If water delivery remains stable but the digital temperature indication becomes irregular, inspect the display and associated electrical connections separately from the hydraulic system. Persistent dripping, difficult regulation, or incomplete shutoff should prompt inspection of the ceramic valve core.

How should the Gray finish, LED area, and digital display be maintained?

Clean the exposed Gray and stainless-steel surfaces with a soft damp microfiber cloth and dry them after cleaning to minimize fingerprints, soap film, and mineral deposits. Keep the touchless sensor area, LED components, digital display surface, and water outlet free from residue. Use diluted pH-neutral cleaner when necessary and avoid abrasive pads, steel wool, acidic descalers, bleach, ammonia, aggressive metal polish, and concentrated chemical cleaners that may scratch or alter the finish.

Gray