FontanaCleanForm™ Chrome Edition Touchless Urinal FAQ
Back-Spud Alignment, Gravity-Flush Performance; Chrome Surface Protection
The FontanaCleanForm™ Chrome Edition touchless urinal combines high-quality stainless-steel construction,
wall-mounted installation, a concealed back-spud connection, gravity flushing, and a polished Chrome finish.
Its reinforced 1.5 mm bowl, 1.2 mm side panels, and 1.0 mm hanging plate are designed for demanding
commercial restroom installations.
How should the back-spud rough-in be coordinated before mounting the urinal?
Establish the waste and back-spud centerlines from the finished wall before installing the fixture.
Verify that structural backing supports the wall-mounted load and coordinate the 24.41-inch height,
15.55-inch depth, and 14.17-inch overall width with partitions, accessibility clearances, and adjacent fixtures.
How should the gravity-flush system be checked during commissioning?
Flush the supply line before the final connection and operate several complete flush cycles.
Confirm even bowl rinsing, unrestricted drainage, reliable automatic activation, and complete
cessation of flow after each cycle. Any weak rinse pattern should be investigated for supply
restriction, debris, or incorrect spud alignment.
Why are the stainless-steel panel thicknesses important for commercial installation?
The 1.5 mm bowl, 1.2 mm side panels, and 1.0 mm hanging plate provide structural rigidity for
repeated public-restroom use. Mounting hardware should engage suitable structural backing so
loads are transferred into the wall framing rather than into plumbing connections or finish materials.
How should the polished Chrome surface be cleaned without scratching or hazing it?
Remove water deposits and restroom residue using a soft damp microfiber cloth, then dry the
stainless-steel surface immediately. Use a diluted pH-neutral cleaner only and avoid abrasive pads,
acidic descalers, bleach concentrates, steel wool, coarse polishing compounds, or aggressive metal polish.
Clean Chrome 
