FontanaZythera Gold Single Hole Motion Sensor Faucet
Radiating class in every sense, the FontanaZythera™ bears in its very name modern art with pragmatic application. Its silhouette is mesmerizingly elegant and sleek, while being effortlessly touchless, owing to motion activation. Quality heavy brass construction affords it a glorious time-tested durability against endless commercial-grade abuse. Further, sophisticated sensing ensures unwavering activation, hygienic discretion, and water conservation through controlled dispensation. The application is guaranteed with pressures ranging from 0.05MPa to 0.8MPa, keeping stable performance. The brushed finish offers more resistance while upholding a level of visual sophistication to bolster a workshop's prestige: output yields 1.58 gallons-6 liters-per-minute-the fertile ground for environmental responsibility and architectural distinction. The FontanaShowers elevates standards for sanitation, combining timeless beauty with modern technology and efficiency.
FontanaZythera™ Gold Sensor Faucet FAQ
Motion Sensor Activation, 1.58 GPM Controlled Flow;
& Gold Surface Protection
The FontanaZythera™ Gold operates across a 0.05–0.8 MPa
pressure range with a controlled 1.58 GPM / 6 L/min flow rate and features
a 6.69-inch overall height, 4.92-inch spout length, and 3.93-inch spout
height for commercial washroom applications.
How should the motion-sensor detection zone be commissioned after installation?
Complete sensor commissioning after the basin, countertop, backsplash,
mirror, lighting, and surrounding restroom accessories are fully installed.
Perform repeated hand-entry and withdrawal cycles from normal washing
positions and confirm prompt water activation followed by complete automatic
shutoff. Check mirrors, polished stone, metallic accessories, and nearby
movement for unintended sensor interaction before placing the faucet into
regular commercial service.
How should the 1.58 GPM flow rate be verified during commissioning?
Flush the water supply before final connection and verify that dynamic
pressure remains within the specified 0.05–0.8 MPa range while the faucet
is operating. Perform repeated activation cycles and confirm stable
discharge at approximately 1.58 GPM / 6 L/min. Weak or irregular flow
should prompt inspection of service valves, supply connections, inlet
passages, filters, and the sensor-controlled valve path before electronic
components are replaced.
How should the 4.92-inch spout length and 3.93-inch spout height be coordinated with the basin?
Establish the single-hole mounting centerline relative to the actual basin
before drilling or tightening the fixture. The 4.92-inch spout projection
should position the water stream within the primary washing zone without
striking the rear bowl wall, drain assembly, or shallow front edge.
Confirm that the 3.93-inch spout height and 6.69-inch overall faucet height
provide adequate hand clearance while controlling splash.
How should the Gold finish and sensor surface be maintained?
Clean the exposed Gold brass surfaces with a soft damp microfiber cloth
and dry them after cleaning to minimize fingerprints, soap film, and
mineral spotting. Keep the motion-sensor area free from residue that
could interfere with reliable detection. Use diluted pH-neutral soap
when necessary and avoid abrasive pads, steel wool, acidic descalers,
bleach, ammonia, aggressive metal polish, scouring compounds, and
concentrated chemical cleaners that may scratch or alter the Gold finish.
- Brand Name: FontanaShowers®
- Model Number: FS47819GL
- Type: Motion Sensor Faucet
- Style: Contemporary
- Finish: Gold
- Faucet Mount: Single Hole
- Installation Type: Deck Mounted
- Material: Brass
- Water Pressure: 0.05Mpa-0.8Mpa
- Surface Treatment: Brushed
- Water Flow: 1.58 gallons per minute/6 liter per minute
- Usage: Commercial
- Faucet Height: 6.69" (170mm)
- Spout Length: 4.92" (125mm)
- Spout Height: 3.93" (100mm)
Luxury Finish, Smart Performance
|
Gold Smart 
