Home > Installation Instructions for Fontana Stainless Steel Shower Panel Tower With Rainfall Shower Head And Spout

How to install Fontana Stainless Steel Shower Panel Tower With Rainfall Shower Head And Spout | SHOWER-MASSAGE-PANEL-0814

Installation Instructions for Bathroom Shower Panel		Visit Product Page
Before you begin, please read the installation instructions below. Observe all local building and safety codes. Unpack and inspect the products for any shipping damages. If you find damages, do not install. Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.	shower

Shower Panel Installation Instructions

Size:

* Item Size: 122 x 24 x 9cm (48"H x 9.5"W x 3.5"D)

* Package Size: 130 x 28 x 15cm (51"H x 11"W x 6"D)

* Gross Weight 13lbs

* Includes a rainfall showerhead, a tub spout, and a handheld showerhead

* Made of stainless steel with Satin Finish

* Lightweight and durable

* Panel is designed for flat wall installation

* Comes with chrome-plated brass hose

* Standard plumbing connection

* Reinforced pipes on the back

* The minimum pressure required is 28 psi and maximum pressure required 72 psi

Step 1:	shower	Step 2:


Step 3:		Step 4:


Step 5:		Step 6:

IMPORTANT Before drilling any holes for the shower panel brackets, ensure there are no hidden cables or pipelines aligned with the desired drilling position. Drill the two holes for the top bracket 1” apart at the desired height. Drill the two holes for the bottom bracket 1” apart at approximately 45” below the top bracket. Insert the wall anchors into the pre-drilled holes as shown in Figure B. Place the shower panel brackets aligned with the drilled holes and using a Philips screw-driver tighten the screws to secure the brackets. Insert the shower wand holder through the pre-drilled hole on the shower panel. Install the water supply hose for the shower wand onto the holder, as shown. Make sure all O-rings are inserted to prevent leakage. Once the shower panel is fully installed and hung on the bracket, you can install the shower wand hose to the holder connection. Finally, install the hand shower to the hose. Screw the cold and hot water hose from the shower panel to the supply lines in the wall. Carefully hang the shower panel on the secured mounting brackets.

Fontana Stainless Steel Shower Panel Tower With Rainfall Shower Head And Spout

Get a Spa shower experience at home. The Fontana Thermostatic Shower Massage Panel System offers a unique combination of a traditional shower and water massage. This panel is equipped with everything you can wish for in a shower system: adjustable massage jets, rainfall showerhead, elegant hand shower. All functions can be used independently or in any combination you wish. Since it is factory pre-plumbed and it has standard connections and is easy to install.