How to install Commercial Motion Chrome Touchless Bathroom Faucets | FS-201R
Easy step by steps Installation Instructions for Sensor Faucet
Visit Product Page
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the products for any shipping damages. If you find damages, do not install.
Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
sensor
Sensor Faucet Installations Instructions
Size
Hole Size Chart
sensor
Specs:
Power source : 6Vdc transformer / Alkaline battery (1.5Vx4 AA size)
The work : There is an infrared sensor to work.
Sensor distance : 20 ± 5 cm
Water pressure : 0.7 - 10 bar
Operation condition 1 : When putting your hand close to the sensor range the system will immediately release the water.
Operation condition 2 : When keeping your hands away from the sensor distance the system will turn off the water immediately.
Optional features : Automatic shutdown after use for more than 60 seconds
Cycle time : 350,000 cycles (for battery)
Installation of the faucet body : Mounted on the basin
Material : Chrome plated brass, thickness 8-10 micron
Inlet pipe size : Ø 1⁄2 inch
Healthcare facilities have seen a prevalence of touchless faucets and automatic soap dispensers. Numerous hospitals have been incorporating these fixtures to uphold hygiene protocols.
We provide comprehensive solutions for latest touchless operation as traditional handle faucets can harbor germs, whereas touch-free operation in restrooms helps prevent the spread of germs.
The hospitality industry, as well as public and high traffic restrooms are experiencing a surge in demand for touchless faucets and automatic soap dispensers, driven by the growing need for hygiene and sanitation solutions.
