Fontana Reno Ceiling Mount Shower Head Set with 6 Body Massage Shower Jets
The customizable Reno shower system is available in chrome, brushed nickel, oil rubbed bronze or gold finish. Color changing LED rain shower heads to range from 12" to 20". Built-in hydro-powered device powers the LED lights, which provide visual shower temperature cues to reduce water waste. Step into your new beautiful shower with Built-in hydro-powered device powers the LED lights, which provide visual shower temperature cues to reduce water waste. The shower head will automatically change color according to water temperature, so you know the temperature of the water. Lights are based on water pressure and will activate when you turn on the water. This shower system comes equipped with Six adjustable body massage jets and a handheld shower ensure complete relaxation. This Fontana Reno Ceiling Mount Shower Head Set with 6 Body Massage Shower Jets provides a luxurious showering experience and is the perfect complement to any modern bathroom. The modern design handheld shower, and an easy-to-use mixer valve, both made from high-quality solid brass. Easy for the elderly and children to shower, handheld showerhead, shower mixer valve control, pressure-balanced valves can prevent scalding injuries, in particular to the elderly and children. Be sure, when it comes to new bathroom shower sets, FontanaShowers is offering shape, finish and styles you're looking for.
Fontana Reno Ceiling Mount Shower Head Set with 6 Body Massage Shower Jets Features
Brand Name: FontanaShowers
Model Number: KRISTAL-SHOWER-HEAD-SET-O
Shower Valve: Triple Concealed
Number of Outlets: 3 Outlets
Shower Type: Thermostatic Shower Set
Shower Head Function: Rainfall
Shower Head Sizes: 12", 16", 20", 24", 20"x 40"
Installation: Ceiling Mount
Body Sprays: 6 Adjustable Jets
Finish: Oil Rubbed Bronze
Feature: Anti Scald Device
1/2" NPT Inlets
Shower Package Kit: Slide Rail Bar & Slim Handshower
Set the wrench in place and turn the nut to the left to loosen it.
Have a hand ready to catch the shower head when it falls so that the metal doesn’t crack your shower floor.
Clean the threads of the base of the shower head steel wool.
Be sure to remove any debris that had collected around the threads.
Wrap the threads with Teflon tape, This tape comes with almost all new shower faucets and heads and provides traction for the new hardware.
Place a rubber “O”-ring inside the new shower head and water connection, this prevents any leaks and improves water pressure.
Tighten the LED shower head.
Test the Temperature Controlled Shower Head to make sure there are no leaks and that everything is working properly.
Now you have a huge improvement in your bathroom for a minimal amount of cost and effort.
Hand-Held Shower Instructions
5. Hole Locations For Wall Mount
Remove Front Cover (5A) from Wall Mount (5B). Use Wall Mount Screw Holes (5C) to place the desired location. Using a punch or awl, tap the screw hole locations. Holes must be vertically aligned.
7. Wall Mount Installation
Place Wall Mount (7A) into wall and inset Mounting Screws (7B) through Wall Mount Holes (7C) and tighten until Wall Mount (7A) is flush with the wall. Do Not Over Tighten! Insert Front Cover (7D) into Wall Mount (7A).
8. Drop Elbow & Hose Installation
Apply PTFE plumbers tape on both ends of Pipe Nipple (8A) (not included). Screw Pipe Nipple (8A) into the elbow inside the wall. The Pipe Nipple (8A) is to project 1/4” – 3/4” from the finished wall. Screw Drop Elbow (8B) onto Pipe Nipple (8A) and tighten until Drop Elbow (8B) is property positioned and flush to the finished wall.
Place Rubber Seal (8C) inside Hex Hose Fitting (8D). Connect Hex Hose Fitting (8D) into Drop Elbow Outlet (8E) by turning Hex Hose Fitting (8D).
9. Unit Start-Up Turn on hot and cold water supplies, and check all connections for leaks.
10. Final Flushing
For final flushing, turn the valve on and allow water to run through the Hose (10A) for several minutes. Allow water to run for several minutes until all foreign matter clears the line.
11. Shower Arm Installation
Place Rubber Seal (11A) inside Tapered Hose Fitting (11B). Conned Hand Shower (11C) to Hose (11D) by turning Tapered Hose Fitting (118) clockwise.
Warning: Make sure Hand Shower (11C) is securely tightened to Hose (11D).
Body Jets Installation
1. Set the decorative cover on the body jet.
2. Roll the raw material belt in the thread screws.
3. Use a wrench to tighten 6 body jets on the water outlet holes in a clockwise direction.
The installations & illustrations for Fontana Reno Ceiling Mount Shower Head are for informational purposes only.
.jpg)
