Installation Instruction Fontana Genoa White Gold Bathroom Sink Faucet
Fontana Genoa White Gold Bathroom Sink Faucet
Bathroom faucet white gold single handle single hole bathroom faucet is a brilliant accessory for your bathroom. The faucet's solid brass fabricated body ensures years of reliable use and provides industrial strength. This sink faucet exemplifies the Fontanashowers collection understated style. Easy-to-install and leak-free. Be sure, when it comes to new bathroom sink faucets, FontanaShowers is offering shape, finish and styles you're looking for. Individuals and families can trust that this faucet will remain rust, corrosion, and tarnish resistant throughout years of use due to its solid brass construction.
Fontana Genoa White Gold Bathroom Sink Faucet Features:
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
faucet
Step 1:
sink faucet
Step 2:
faucet
Step 3:
Step 4:
Slide flange and round gasket (1) up over tubes and mounting stud. Slide tubes down through the mounting hole and position faucet assembly on the sink. Option: If the surface is uneven, use silicone under the gasket. Place metal bracket (2) over mounting stud (3) under the sink. Secure with mounting nut / wrench (4).
Make Connections to water supplies (1), Use the recommended connectors (2) (not supplied), see step 2B. Turn on hot and cold water supplies and flush water lines into a container for one minute. Important: This flushes away any debris that could cause damage to internal parts.
Step 5:
Step 6:
Step 7:
Slide flange and round gasket (1) up over tubes and mounting stud. Slide tubes down through the mounting hole and position faucet assembly on the sink. Option: If the surface is uneven, use silicone under the gasket. Place metal bracket (2) over mounting stud (3) under the sink. Secure with mounting nut / wrench (4).
Make Connections to water supplies (1), Use the recommended connectors (2) (not supplied), see step 2B. Turn on hot and cold water supplies and flush water lines into a container for one minute. Important: This flushes away any debris that could cause damage to internal parts.
1. Remove the mounting nut, metal washer, and rubber washer from the threaded pipe. 2. Fit the O-ring into the groove of the faucet body. Screw waterlines into the corresponding screw-hole of the faucet body. 3. Insert waterlines and threaded pipe into the hole of the sink. 4. Install rubber washer, metal washer, and mounting nut back to the threaded pipe. Adjust the faucet body correctly and secure with mounting screws tightly. 5. Connect waterlines to angle stops. Turn on the angle stops and check for leaks (DO NOT TURN FAUCET ON). 6. Turn faucet on for 1 minute to flush any debris.
The installations & illustrations for Fontana Genoa White Gold Bathroom Sink Faucet are for informational purposes only.