How should the adjustable 16–32 cm infrared detection zone be commissioned?

Allow the faucet to complete its automatic calibration without placing hands or objects inside the sensing field. After calibration, verify activation at multiple approach angles and adjust only when basin reflections or nearby accessories create false triggering or detection gaps.

Why must the faucet remain unused during its initial sensor-calibration period?

Movement within the sensing field during startup may be interpreted as part of the surrounding environment, producing an unsuitable detection distance. Keeping the basin area clear allows the controller to establish a stable infrared reference.

How should the specified opening and closing response times be verified?

Repeated cycle testing should confirm water delivery in less than one second after hand detection and valve closure in less than two seconds after the hands leave. Slower response can indicate low power, cable issues, restricted inlet flow, or valve contamination.

What commissioning procedure protects the G1/2-inch motor valve from construction debris?

Flush the incoming water line into a container before connecting it to the control box, then operate the faucet for an additional flushing cycle. This removes particles that could obstruct the inlet screen or damage the motor-valve sealing surfaces.

How should AC and DC power continuity be tested for the FS-1095N?

Verify normal operation from the AC 220–240 V supply, then interrupt mains power and confirm that the DC 6 V battery system maintains sensor and valve operation. Use four new alkaline AA batteries of the same brand and condition.

Why should the faucet and an automatic soap dispenser have parallel rather than intersecting sensor centerlines?

Intersecting infrared fields can cause one fixture to activate when a user approaches the other. Parallel centerlines and adequate lateral separation help preserve independent detection zones and reduce simultaneous nuisance activation.

How should the optional thermostatic mixer be validated under changing supply conditions?

Confirm correct inlet orientation, stable mixed-water delivery, and safe outlet temperature while cycling nearby fixtures to create pressure variation. The mixer should remain accessible beneath the sink for adjustment, inspection, and servicing.

Which lifecycle checks support the motor valve's rated high-cycle performance?

Maintain clean inlet screens, stable operating pressure, secure electrical connections, correct battery condition, unobstructed G1/2-inch waterways, and prompt valve closure. Periodic cycle testing can identify increasing response time or residual leakage before functional failure.

Napoli Brushed Nickel Touchless Faucets

Napoli Commercial Brushed Nickel Automatic Touchless Restroom Smart Sensor Faucet

Alternative Views:

Retail Price: $876.31

Sale Price: $826.31

Savings: $50.00

Sale Price: $826.31

Availability: Special Order(Min Qty Required)

Product Code: FS-1095N

Hot & Cold Option:

Qty:

Description

Technical Specs

Extended Information

Matte Black

Chrome

Napoli Commercial Brushed Nickel Automatic Touchless Restroom Smart Sensor Faucet

This Napoli Commercial Brushed Nickel Automatic Touchless Restroom Smart Sensor Faucet will make your life easier. It has a Brushed Nickel finish providing exceptional amenities that sets your restroom apart from others. The infrared sensors enable totally hands-free operation, effectively preventing the transfer of germs.

Brand Name: FontanaShowers®
Model Number: FS-1095N
Type:Commercial Touchless Bathroom Faucet, Motion Sensor Sink Faucet
Style: Contemporary
Finish: Brushed Nickel
Faucet Mount: Single Hole
Faucets height: 6.69" (170mm)
Spout length: 4.92" (125mm)
Spout height: 3.93" (100mm)
Installation Type: Deck Mount
Material: Brass
Water Pressure: 0.05Mpa-0.8Mpa
Surface Treatment: Polished
Water Saving: Volume 6L Each Time
Usage: Commercial restrooms, and high traffic bathroom facilities
Hands-free operation is ideal for commercial use applications in public restrooms, restaurants, office buildings, and public facilities. Fits all standard US plumbing.
ADA Compliant

FontanaAltis MotionFlow™ Edition Brushed Nickel Faucet FS-1095N

Features

Browse Featured Selections

Touchless Faucet

Chrome Touchless Faucets

Dual Touchless

Explore Our Catalogs Browse Our Project List Architectural Firms /Clients

Average Rating: Average Rating: 5 of 5

5 of 5 Total Reviews: 2 Write a review »

6 of 6 people found the following review helpful:

Love it! Looks amazing!	December 7, 2022
Reviewer: the next ENTERprise from Elkton, MD

For our office restroom sinks, a water pressure range of 0.05 MPa to 0.8 MPa is ideal. The pressure is just right to quickly wash hands, but not so much that water is sprayed everywhere. Additionally, they are very simple to regulate the pressure and change it to our preferences.

Was this review helpful to you?