The crown of austere beauty and the hallmark of exquisite craftsmanship is worn by Aurevia™ Line Chrome. The polished brass surface not only exudes elegance but also offers the best protection against corrosion and wear. The faucet, equipped with advanced infrared technology, gives you instant, hands-free water control thus providing both efficiency and hygiene.
Its sleek deck-mounted design fits seamlessly into contemporary or commercial locations while having a minimalistic look along with functional reliability. A robust ceramic valve enables the flow to be quiet and smooth irrespective of the pressure which can vary from 0.1 to 1.6 MPa. The faucet is made for single-hole fitting and thus, along with performance, it provides simplicity without losing any of its quality in the design. The chrome finish reflects the light and hence, it brightens up every interior with its smooth and brilliant look. FontanaShowers symbolizes the merger of innovation, strength, and beauty, thus giving a well-rounded experience that mirrors FontanaShowers' dedication to outstanding design, resource savings, and the provision of modern appliances in the upscale toilet areas.
FONTANA AUREVIA™ LINE
Fontana Aurevia Touchless Faucet FAQs
Commercial deck-mounted automatic sensor faucet with brass
construction, ceramic valve control, single-hole installation,
infrared hands-free operation, and coordinated architectural
finishes for contemporary commercial washrooms.
✥ Sensor Commissioning Procedure? +
Complete infrared sensor commissioning after the basin,
countertop, backsplash, mirror, lighting, and adjacent
accessories are installed. Verify dependable hand detection
through the intended washing zone and confirm reflective
surfaces do not create unintended activation.
◇ Hydraulic Checks During Installation? +
Flush the water supply before final connection,
inspect the plumbing path for construction debris, confirm
service stops are fully open, and verify stable dynamic
pressure before commissioning the sensor-controlled
ceramic valve assembly.
◯ Basin and Spout Coordination? +
The Aurevia measures approximately 11.42 inches
overall with a 7.95-inch spout height and 4.09-inch reach.
Coordinate the mounting position with basin geometry,
drain location, and countertop setback to maintain
comfortable hand clearance and control splash.
↻ Continuous Water Flow Diagnostics? +
Clean the infrared detection area and remove
stationary or reflective objects from the sensing field.
Inspect the ceramic valve and internal water path for
sediment, mineral accumulation, or incomplete closure
when automatic shutoff becomes inconsistent.
⌁ Operating Water Pressure? +
The Aurevia specification lists an operating
pressure range of approximately 0.1–1.6 MPa.
Verify pressure under dynamic operating conditions and
provide regulation where required to maintain stable
sensor-controlled discharge.
⌂ Maximum Deck Thickness? +
The specified maximum deck thickness is approximately
1.77 inches. Confirm countertop construction, mounting-hole
geometry, anchoring clearance, and below-deck service access
before installation to maintain a secure faucet assembly.
⚡ Ceramic Valve Performance? +
The faucet incorporates a ceramic valve core.
During commissioning, perform repeated activation and
shutoff cycles and investigate sediment, pressure
instability, or valve contamination if closure becomes
delayed or incomplete.
⌕ Routine Finish Maintenance? +
Clean decorative surfaces using a soft microfiber
cloth and mild pH-neutral cleaner. Avoid abrasive pads,
acidic descalers, bleach, ammonia, aggressive polishing
compounds, and concentrated chemicals that could damage
the selected architectural finish.
Chrome
♧
4.09" Reach
Basin Coordination
◇
Brass Body
Commercial Construction
⌁
Infrared Sensor
Hands-Free Operation
⚙
Ceramic Valve
Precision Control
◇
0.1–1.6 MPa
Pressure Range
