 |
 |
 |
 |
 |
 |
 |
Features
FS-30186
2-Person
59.44" × 59.44" × 22.83"
Air Pump 200W
Water Pump 1HP
6 Air + 6 Hydro Jets
Underwater LEDs ×4
110–220V
Combo Massage Bathtub — System Documentation
Diagram-style overview of the air + water massage circuits, electrical loads, and commissioning workflow for FS-30186.
Diagram 1 — Functional Architecture (Hydro + Air + Controls)
WATER INLET (fill) ───────────────► BATHTUB BASIN
│
▼
┌─────────────────┐
│ WATER PUMP 1HP │──────────────► HYDRO MASSAGE LOOP
└───────┬─────────┘ (6 BIG JETS)
│
(recirc)
│
▼
RETURN TO BASIN
AIR INTAKE ─────────► ┌─────────────────┐ ─────────► AIR BUBBLE LOOP
│ AIR PUMP 200W │ (6 SMALL JETS)
└─────────────────┘
CONTROL PANEL / SWITCHES
├─ Massage system ON/OFF
├─ Underwater LEDs (4 pcs)
├─ Radio + speaker
└─ Function switch + main switch
- Hydro massage: water pump (1×1HP) drives 6 big massage jets (recirculating loop).
- Air bubble: air pump (1×200W) drives 6 small air bubble jets.
- Electrical: listed power usage supports 110–220V / 110V configurations (verify site power before rough-in).
- Lighting + AV: 4 underwater LED lights + radio/speaker are integrated functions.
Diagram 2 — Rough-In + Commissioning Workflow (Installer QC)
[1] SITE / ROUGH-IN VERIFICATION
├─ Confirm footprint: 59.44" × 59.44" × 22.83"
├─ Confirm seating capacity: 2 adults (clearances + access)
├─ Verify dedicated electrical per local code (110–220V)
└─ Plan service access for pump(s) + controls
▼
[2] PLUMBING PREP
├─ Water supply for tub fill + spout (1 pc)
├─ Verify drain alignment + trap access
└─ Pressure-test supply connections before closing enclosure
▼
[3] ELECTRICAL / FUNCTIONAL CHECKS
├─ GFCI protection per local code (wet-location equipment)
├─ Power-on: confirm control switches, LEDs (×4), radio/speaker
└─ Confirm pumps start/stop cleanly (no abnormal vibration)
▼
[4] WET COMMISSIONING (WITH WATER IN BASIN)
├─ Run water pump: confirm hydro jets ×6 (uniform output)
├─ Run air pump: confirm air jets ×6 (consistent bubbling)
└─ Inspect for leaks at all unions, jet bodies, and plumbing joints
▼
[5] HANDOVER / MAINTENANCE BASELINE
├─ Record voltage + functional pass/fail in closeout notes
├─ Provide maintenance guide + warranty sheet links on page
└─ Advise periodic intake cleaning to maintain pump performance
- Spec snapshot: acrylic board 3.0–3.5 mm (material listed), package weight 124.0 kg. :contentReference[oaicite:4]{index=4}
- Practical QC: always test jets with a filled basin—dry-running can damage pump seals.
- Documentation on page: BIM file, spec sheet, installation instructions, repair & maintenance guide, warranty sheet.
|
|
 |
 |
 |
 |

|