Fontana Chatillon™ Black Brass Touchless Basin Faucet FAQ
Infrared Touchless Activation, Ceramic Valve Control;
7.28" Faucet Length & Black Surface Protection
The Fontana Chatillon™ Black Touchless Faucet combines brass construction,
infrared sensing, ceramic valve control, and single-hole deck mounting
in a modern commercial-ready design.
How should the infrared sensor be commissioned after installation?
Complete commissioning after the basin, countertop, mirror, lighting,
and surrounding fixtures are installed. Test repeated hand-entry and
withdrawal cycles and confirm reliable water activation and complete
automatic shutoff. Check reflective countertops, mirrors, and nearby
metallic surfaces for unintended infrared triggering.
How should the ceramic valve and hot/cold supplies be commissioned?
Flush both supply lines before final connection and verify correct hot
and cold routing. Perform repeated operating cycles and confirm stable
water delivery without leakage or delayed shutoff. If performance becomes
inconsistent, inspect the supply path and ceramic valve before servicing
the sensor electronics.
How should the 7.28-inch faucet geometry be coordinated with the basin?
Confirm the mounting centerline against the actual basin before final
tightening. The faucet measures approximately 7.28 inches long,
6.10 inches high, and 2.17 inches wide. Verify that discharge lands
within the primary washing zone while maintaining adequate hand
clearance and splash control.
How should the Black finish and infrared sensor area be maintained?
Clean exposed surfaces with a soft damp microfiber cloth and dry them
afterward. Keep the infrared sensor area and outlet free from soap film
and mineral deposits. Avoid abrasive pads, steel wool, acidic cleaners,
bleach, ammonia, and aggressive polishing compounds that could damage
the Black finish.