Fontana Couron Commercial Oil Rubbed Bronze Deck Mount Automatic Touchless Sensor Faucet
Vandal-Proof Automatic Faucet; Heavy-duty solution for high-risk locations offering reinforced design, low-flow efficiency, and reliable automatic operation. If you're looking for improved touchless convenience, enhanced hygiene, energy efficiency, and durable performance with instant on and off built in technology this is a great choice.
This Fontana touchless bathroom faucet is easy to use, instant on and off technology, simple and intuitive making it a great choice among architects and designers. Improve hygiene in public restrooms with this State of the art Touchless Volume Sensor faucet in a class of its own. It has Oil Rubbed Bronze finish which sets your public restroom apart from others. The infrared sensors enable totally hands-free operation, effectively preventing the transfer of germs. This Fontana Couron Commercial Oil Rubbed Bronze Deck Mount Automatic Touchless Sensor Faucet is compatible with all standard US plumbing. This cast brass electronic faucet in reducing the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucet handles.
Fontana Couron™ Oil Rubbed Bronze Commercial Automatic Touchless Sensor Faucet FAQ
16–32 cm Adjustable Sensor Control, AC/DC Power;
500,000-Cycle Motor Valve & Oil Rubbed Bronze Protection
The Fontana Couron™ Commercial Oil Rubbed Bronze Automatic Touchless Sensor
Faucet combines cast-brass construction with hands-free infrared control for
high-traffic commercial washrooms. The single-hole deck-mounted faucet features
an adjustable 16–32 cm detection zone, AC/DC power capability, G1/2-inch
connections, 1.2 GPM flow at 60 PSI, rapid automatic valve response, and a
commercial motor valve rated for up to 500,000 operating cycles.
How should the adjustable 16–32 cm infrared sensor zone be commissioned?
Complete sensor commissioning after the basin, countertop, mirror,
lighting, backsplash, soap dispenser, and surrounding accessories are
installed. Keep the detection area unobstructed during initial power-up
so the controller can complete its sensor initialization. Test repeated
hand-entry and withdrawal cycles throughout the intended 16–32 cm
detection zone and confirm valve opening in less than approximately
1 second and complete closing within approximately 2 seconds.
How should the AC/DC power system be coordinated for commercial operation?
The control system supports DC 6V power from four AA alkaline batteries
as well as AC 220–240V, 50/60Hz operation. Keep the transformer, battery
compartment, sensor wiring, and valve connections accessible beneath the
deck while protecting them from plumbing leakage. After power is connected,
perform repeated activation cycles and verify stable sensor response,
automatic valve operation, and reliable shutoff before placing the faucet
into normal service.
What should be checked if flow or automatic valve performance becomes inconsistent?
Flush the supply piping before final connection and inspect the G1/2-inch
inlet and outlet connections, integrated shutoff, supply path, and outlet
for construction debris or restriction. The specification identifies a
1.2 GPM flow rate at 60 PSI and a motor valve rated for as many as
500,000 cycles. If infrared detection remains reliable but water delivery
becomes weak, delayed, or fails to stop completely, troubleshoot the
hydraulic and motor-valve components separately from the sensor electronics.
How should the Oil Rubbed Bronze finish and sensor surface be maintained?
Clean the exposed Oil Rubbed Bronze surfaces with a soft damp microfiber
cloth and dry them after cleaning to minimize fingerprints, soap film,
water spots, and mineral residue. Keep the infrared sensor window and
outlet free from deposits that could interfere with detection or water
delivery. Use diluted pH-neutral cleaner when necessary and avoid abrasive
pads, steel wool, acidic descalers, bleach, ammonia, aggressive metal
polish, and concentrated chemicals that may prematurely alter the bronze
finish.
Couron Sensor Faucet Details
- Brand Name: FontanaShowers®
- Model Number: FS-1095ORB
- Type:Commercial Touchless Bathroom Faucet, Motion Sensor Sink Faucet
- Style: Contemporary
- Finish: Oil Rubbed Bronze
- Faucet Mount: Single Hole
- Faucets height: 6.69" (170mm)
- Spout length: 4.92" (125mm)
- Spout height: 3.93" (100mm)
- Installation Type: Deck Mount
- Material: Brass
- Water Pressure: 0.05Mpa-0.8Mpa
- Water Saving: Volume 6L Each Time
- Usage: Commercial restrooms, and high traffic bathroom facilities
- Hands-free operation is ideal for commercial use applications in public restrooms, restaurants, office buildings, and public facilities. Fits all standard US plumbing.
- ADA Compliant
FontanaCrest TouchFree™ Collection Oil Rubbed Bronze Faucet
Fontana Couron Commercial Oil Rubbed Bronze Deck Mount Automatic Touchless Sensor Faucet Features:
|
Great design 
